31 October, 2024, 11:28:12 PM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Need to contact the Forum Administrator? e-mail
forum.admin@lanciamc.co.uk
- Copy deadline for Viva Lancia is 12th of each month. - For Events e-mail
events@lanciamc.co.uk
- To Join the club go to
http://www.lanciamc.co.uk/join.htm
Home
Help
Search
Calendar
Register
Lancia Motor Club
>
Model Technical and Interest
>
Aprilia, Ardennes and Ardea
>
Aprilia rear suspension two questions
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Aprilia rear suspension two questions (Read 3085 times)
0 Members and 1 Guest are viewing this topic.
MaciekPeda
Member
Posts: 40
Aprilia rear suspension two questions
«
on:
19 January, 2013, 10:56:09 PM »
Hi !
I am already put together my Aprilia rear suspension and i have two question related to this assembly:
1. Modern equivalent for rear wheels bearings
2. Did yours know, how repair wrong bearings in links between rear spring and control arms ? Or must i look for better ones ? See picture.
Kindly regards
Link.jpg
(209.59 KB, 1468x1428 - viewed 408 times.)
Logged
Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
Parisien
Administrator
Permanent resident
Posts: 4287
Re: Aprilia rear suspension two questions
«
Reply #1 on:
20 January, 2013, 01:15:10 AM »
Hope this is of use - see post by bluesky
http://www.lancia.myzen.co.uk/forum/index.php?topic=2928.msg37799#msg37799
P
Logged
Frank Gallagher
BlueSky
Lapsed
Senior Member
Posts: 183
Re: Aprilia rear suspension two questions
«
Reply #2 on:
20 January, 2013, 05:08:58 AM »
The bearing in the spring retainer I think is phosphor bronze bush which could be done in a lathe, don’t know if Cavalitto has them as new.
The wheel bearings for you car, which I seem to remember is 2nd series, shown on the TAV below .
6 = p/no. 48349 is a RIV 4AANO. As far as I can see there is no modern equivalent, maybe a second series owner can help here?
7 = p/no 49054 is a NF205 double row roller bearing which seems to readily available.
A modification I did was to fit grease nipples to the parts as shown in the attached photo.
Noel
S1 rear.jpg
(324.38 KB, 1024x683 - viewed 424 times.)
Wheel bearings S2.jpg
(539.42 KB, 1141x1633 - viewed 425 times.)
Logged
1937 1st series Aprilia Berlina
Nissan X-Trail T31 TS
1920 P & M 3 1/2hp {FOR SALE}
John Deere LX188
www.narrywoolan.com.au/home
MaciekPeda
Member
Posts: 40
Re: Aprilia rear suspension two questions
«
Reply #3 on:
20 January, 2013, 07:27:42 PM »
Thank you for any advice !
Logged
Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> About the LMC Forum
=> General Chat
=> Press/Media: Lancias mentioned, seen or wanted!
=> Competition Information
=> Events 2024
=> Events 2025
=> Local Events
=> LMC Legends
=> Links
-----------------------------
Model Technical and Interest
-----------------------------
=> Pre-Lambda
=> Lambda
=> DiLambda
=> Artena and Astura
=> Augusta
=> Aprilia, Ardennes and Ardea
=> Aurelia
=> Appia
=> Flaminia
=> Flavia
=> Fulvia
=> Stratos
=> Beta and Montecarlo
=> Gamma
=> Delta and Prisma
=> Dedra, Thema and Delta (2nd series)
=> Ypsilon, Musa and Y10
=> Kappa
=> Thesis
=> Delta (2008-)
=> Commercial Vehicles
=> Other Lancia Models
-----------------------------
Buy, Sell and Search
-----------------------------
=> Members' cars for sale
=> Lancia vehicles for sale
=> Lancia vehicles required
=> Spares for sale
=> Spares required
-----------------------------
Events Archive
-----------------------------
=> Events 2011
=> Events 2012
=> Events 2013
=> Events 2014
=> Events 2015
=> Events 2016
=> Events 2017
=> Events 2018
=> Events 2019
=> Events 2020
=> Events 2021
=> Events 2022
=> Events 2023
Loading...