Lancia Motor Club Forum Banner
23 April, 2024, 12:52:40 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: 1.6HF (Fanalone) spare wheel mounting straps position  (Read 674 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Posts: 4909



« on: 02 January, 2024, 11:58:37 AM »

Can anyone get me measurement of where the leather strap eyes are mounted on the boot floor - that hold the spare wheel in place.



The eyes on my car are to one side  (filler side) and do not hold the wheel, and the jack holder is compromised.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Scott
Megaposter
*
Posts: 298



« Reply #1 on: 03 January, 2024, 09:28:27 AM »

Hi Tim
Would love to help but on a 1.3 (S2) the spare wheel is clamped down via a stud from the boot floor rather than using a leather strap.
Hopefully someone with a 1.6 will respond soon!
Logged
jus
Senior Member
*****
Posts: 123



« Reply #2 on: 03 January, 2024, 04:38:52 PM »

Hi Tim.
One of my S1's has a spare with a strap over it. It has an internal tank, but it looks like this has been fitted around the original position of the spare wheel. I can take a few pics and measurements - but are there any specific details or reference points that you're after?
Logged

1969 S1 Fulvia 1.6
1971 Ex-works Fulvia 1.6
1975 Gr4 Stratos HF
1982 Beta Spyder
1982 037 Rally

Recently passed: 1986 Delta S4
Long since passed: Delta HF Turbo ie, Delta HF Turbo (carb), Delta 1500.
lancialulu
Press Officer
Permanent resident
*****
Posts: 4909



« Reply #3 on: 03 January, 2024, 05:00:38 PM »

Hi Tim.
One of my S1's has a spare with a strap over it. It has an internal tank, but it looks like this has been fitted around the original position of the spare wheel. I can take a few pics and measurements - but are there any specific details or reference points that you're after?

Thanks Jus

Solved the mystery today. For those with original S1 1.6HF this is the config. The straps and mountings where ther but the wheel being on the horizontal the straps did not do up. Some detective work with the parts book and the Lancia Fulvia bible showed the wheel should be angled against the inner wheel arch covering the jack. as per photo. Then the straps work perfectly! It does not look angled but it is and there is a vertical bar on the rear panel to stop the spare wheel making an impression.


* IMG-20240103-WA0002.jpeg (1082.68 KB, 3840x2160 - viewed 27 times.)
« Last Edit: 03 January, 2024, 05:02:48 PM by lancialulu » Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Charles Frodsham
Megaposter
*
Posts: 244



« Reply #4 on: 04 January, 2024, 04:34:07 PM »

That is probably right Tim.

Mine has always been done this way…see photo..flat on the boot floor, by threading strap through wheel slots. Either way, if the wheel is reverse side up, it’s a really useful place to put the tool roll, which seems perfectly shaped to fit in the wheel…..plus spare plugs/filters/points etc.

There is a cover which holds all the items in place, which covers approximately 2/3 of the tread, suggesting the wheel is in fact stored on a tilt.


* IMG_0676.jpeg (1489.59 KB, 3264x2448 - viewed 31 times.)

* IMG_0677.jpeg (1378.06 KB, 3264x2448 - viewed 30 times.)
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4909



« Reply #5 on: 04 January, 2024, 04:49:43 PM »

Thats interesting Charles. Being a pedant (or maybe my parts book is wrong) There is no cover listed for the 1.6HF. Maybe it was a weight issue... Anyway I have those covers on my other 1600HF with wheel inverted and cover fitted into the centre and tool bag on to in this well. The straps on this car are original and where they want to do up is with the wheel where it is.

* spare wheel position.pdf (243.05 KB - downloaded 21 times.)
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Charles Frodsham
Megaposter
*
Posts: 244



« Reply #6 on: 04 January, 2024, 06:32:22 PM »

I will try mine as you suggest, and see how I get on 👍😁
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.1 seconds with 20 queries.