Lancia Motor Club Forum Banner
14 October, 2024, 11:38:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Bore Scoring  (Read 1235 times)
0 Members and 2 Guests are viewing this topic.
SiPotter
Member

Posts: 1


« on: 06 October, 2023, 06:46:19 PM »

Hi, I’m new to the Club and the forum. After being introduced to the Fulvia in the 1980's by my old boss in Cornwall and owning 3 1.3 S3's in the late 80’s into the early 90's I’ve recently bought a 1600HF reg. NSW 7M. The car has extensive history and although I was told the car had a motor rebuild in the last 5000 miles the bores (no4 in particular) are showing some signs of both polishing and scoring. I put a bore scope in today and can attach some images for comments. There’s not a lot of carbon build up and compression is good across all 4.
Any advice would be much appreciated!


* 2023-10-06-11-01-30-513.jpeg (92.18 KB, 1280x720 - viewed 76 times.)
Logged
Wangler
Megaposter
*
Posts: 300


« Reply #1 on: 06 October, 2023, 08:30:36 PM »

Seems to me to be a case of if it ain’t broke don’t fix it.

Ok, there might be some scoring and possibly polishing. The compression is good so what could you do about it that would make any noticeable difference to it that doesn’t involve dismantling the engine?

Use good oil and enjoy it, remembering that these cars are designed to be driven hard! Before the advent of bore scopes you would have been none the wiser.
Logged

Fulvia Coupe 1976
Fulvia Coupe 3 1975
lancialulu
Press Officer
Permanent resident
*****
Posts: 5021



« Reply #2 on: 07 October, 2023, 05:54:46 AM »

It is easy to break or chip piston rings when assembling a Fulvia, or they sometimes break if not “gapped” correctly. Those vertical scoring marks could be due to a ring problem.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Mikenoangelo
Megaposter
*
Posts: 463


« Reply #3 on: 07 October, 2023, 10:09:14 PM »

 I also think its a ring problem as, if I understand the picture  correctly, the scratches are to the front or back of the cylinder relative to the alignment of the engine. Piston siezure marks are most often on the side to side orientation of the piston.

Mike Clark
Logged
nistri
Megaposter
*
Posts: 558


« Reply #4 on: 08 October, 2023, 04:07:18 PM »

Inxorrect fitting of piston rings is not rare because standard piston ring compressors cannot be used on Fulvias. Furthermore, there are around low quality rings of unclear origin. It is advisable to use Goetze (Germany) or Perfect Circle (USA) for rings, bearing in mind that for the 1298 engine the rings are the same as for the Fiat 126 early series (of course 2 sets are needed). The Fiat rings are more readily available (and cheaper). Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
lancianut666
Permanent resident
**
Posts: 1763


Slow but rough


« Reply #5 on: 12 October, 2023, 06:52:23 AM »

Nice tip regarding the Fiat rings. When rebuilding my Appia engine I had lots of problems with piston rings either breaking (pieces just breaking off!) or being the shape of a thruppeny bit to quote my engine man.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.054 seconds with 20 queries.