Lancia Motor Club Forum Banner
29 March, 2024, 12:40:42 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Cooling System  (Read 2664 times)
0 Members and 1 Guest are viewing this topic.
nthomas1
Rebel Poster
*
Posts: 845



« on: 15 April, 2017, 10:30:08 AM »

Some more questions from a novice!
I removed the radiator and associated hoses from my S2 Coupe, to give me better access to the rear of the front valance and front panel where I am sanding and grinding ahead of painting.   I've cleaned and painted the fan shroud, and I've located replacement radiator hoses from Omicron.  That leaves me with a few questions:
1) Is there any problem leaving the engine without water for a lengthy period of time - at least 6 months, maybe 12.  This may be a daft question!  But I wondered if the internals of the engine are better protected with water in place than without.
2) Are there any special tests I should conduct on the radiator before re-fitting it.
3) It would seem to make sense to replace all of the hose clips at the same time as fitting the new hoses.  Any thoughts on best option out of:
        (a) try to find original clips/clamps (are they even available),
        (b) fit hose clamps (non-jubilee type), or
        ((c) fit jubilee clips (presumably should use stainless steel rather than plated?)
As always, advice would be appreciated.

Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #1 on: 15 April, 2017, 11:13:54 AM »

If engine is dried out completely and stored in the dry it should not be a problem. Problems occur if water is left in lowest parts and cause additional corrosion to give trouble down the road. Do not store filled with water as this could freeze (so being pedantic if you stored it with anything it should be >30% antifreeze....). Re rad I would take to a radiator refurb comanpy and let them pressure test it (for free....). They would get the work if it was faulty...

Re clips if you have bought silicon hoses you need a rolled edge jubilee s/s clip. others will cut hose over time...
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
nthomas1
Rebel Poster
*
Posts: 845



« Reply #2 on: 15 April, 2017, 01:19:36 PM »

Thanks Tim.
With the rad and hoses removed, is it still possible to fill the engine with water/antifreeze?
Would I block off one opening and then rig a pipe up to the other to pour the mix in?  Once again, sorry for my ignorance on this!
Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
frankxhv773t
Permanent resident
**
Posts: 2204



« Reply #3 on: 15 April, 2017, 05:20:06 PM »

If your hoses aren't silicone simonandjuliet posted about some original Lancia style clips in A fettler's voyage (why can you never find something to post a link when you need to?). If they are silicone Dave Gee at Classic Silicone Hoses stocks the right sort of hose clip.
Logged
Caracad
Senior Member
*****
Posts: 123



« Reply #4 on: 19 April, 2017, 11:56:35 AM »

I would always store an engine dry.
The coolant should have all drained out. Corrosion is only really a problem with the aluminium cylinder head. Generally caused by galvanic action between the aluminium and steel parts when full of coolant without corrosion inhibitor i.e antifreeze. 
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.097 seconds with 20 queries.