Lancia Motor Club Forum Banner
01 December, 2021, 12:19:56 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Fiat Twin-cam engine  (Read 1289 times)
0 Members and 1 Guest are viewing this topic.
ben
Lapsed
Megaposter
*
Posts: 456


« on: 09 December, 2016, 05:53:40 PM »

The pictures show an old Fiat engine I have had in the corner of my garage for about 20 years.
I have just disinterred it with a view to disposal and wondered if anybody could tell me what car it might have come from.I acquired it as payment for a job I did for a chap who had in turn got it with a view to installing it in a Lada Niva--if I remember correctly!
What seems unusual about it to me is the flywheel which is really only a diaphragm to carry the starter ring gear and has very little mass compared with a normal flywheel.I am assuming this is because it was attached to an automatic gearbox.


* Fiat twin cam engine 003.JPG (787.74 KB, 2048x1536 - viewed 232 times.)
Logged
ben
Lapsed
Megaposter
*
Posts: 456


« Reply #1 on: 09 December, 2016, 05:57:23 PM »

More!


* Fiat twin cam engine 001.JPG (803.71 KB, 2048x1536 - viewed 261 times.)

* Fiat twin cam engine 004.JPG (783.33 KB, 2048x1536 - viewed 269 times.)
Logged
SanRemo78
Rebel Poster
*
Posts: 718



« Reply #2 on: 09 December, 2016, 06:07:31 PM »

Based on the water pipe fitting between the cam wheels it's a Fiat motor for a rear wheel drive car rather than a transverse mounted front wheel drive.

Guy
Logged
peteracs
Administrator
Rebel Poster
*****
Posts: 813



« Reply #3 on: 10 December, 2016, 01:21:50 PM »

Not sure where Fiat put their engine numbers, but on the Lancias of this type it was just above the Oil filter housing stamped into the block.

As mentioned it is out of a rear wheel drive such as Fiat 124 and assuming the cambelt cover label is correct then a later car as 2 litre.

Peter
Logged

Beta Spyder S2 pre F/L 1600
Saab 9-3 1.9Tid Cabrio
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.044 seconds with 20 queries.