Lancia Motor Club Forum Banner
12 May, 2021, 08:41:11 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail, for Database Administrator e-mail      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail      -      To Join the club go to
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
Author Topic: over-size pistons for fulvia 1.3 818.303 engine  (Read 888 times)
0 Members and 1 Guest are viewing this topic.
Posts: 12

« on: 18 June, 2016, 07:48:20 AM »

Hi all

I'm after a set of 77.4mm or 77.6mm pistons for a fulvia 1.3s project engine, please let me know if you have or know of any available.

Many thanks
Rebel Poster
Posts: 999

« Reply #1 on: 20 June, 2016, 04:00:26 PM »

Why not have some made? Vere Lancia had sets made for my Lambda and Augusta at quite reasonable prices. It would probably be even cheaper if you went to the manufacturer in the USA directly, but going through Vere Lancia makes the job simpler. The only things I didn't like with the pistons, are the circlips, which are simply almost complete circles of strong "wire". I had to make a special tool to fit them. They weigh twice as much as conventional circlips, too.
Regards, John

* 274V.jpg (874 KB, 1203x1155 - viewed 153 times.)
Posts: 12

« Reply #2 on: 23 June, 2016, 05:51:28 AM »

Thanks John good thought
Pages: [1]   Go Up
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.075 seconds with 20 queries.