Lancia Motor Club Forum Banner
28 March, 2024, 08:09:54 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: B20 Twin Weber Nardi castings  (Read 2037 times)
0 Members and 1 Guest are viewing this topic.
chriswgawne
Permanent resident
**
Posts: 2038



« on: 03 November, 2015, 08:49:44 AM »

I am not sure whether these castings are originals or copies but it probably doesn't matter as the originals weren't especially well finished but interesting to see that the reserves wasn't met @ £2,417.70. (Original castings seem to have a faint Nardi symbol stamped on the bridging manifold.)

http://www.ebay.co.uk/itm/331689739590?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
40
A 2nd carb (or a pair) needs to be sourced and asking prices at Padova were min €3,400 for a DCL and higher for a 40DCZ. Also the gaskets, throttle linkage and airbox casting need to be sourced. Then you need a modified camshaft to get the best out of the twin carbs. Quite an expensive exercise but they do look nice and give more power and the engine seems to rev more freely over 5,000rpm.
Chris

Logged

Chris Gawne
Mobile: 07778 216552
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.077 seconds with 21 queries.