Lancia Motor Club Forum Banner
28 March, 2024, 10:04:29 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 ... 6 7 8 9 10 [11] 12 13 14 15 16 ... 31   Go Down
  Print  
Author Topic: my new integrale  (Read 160083 times)
0 Members and 1 Guest are viewing this topic.
SanRemo78
Rebel Poster
*
Posts: 826



« Reply #150 on: 16 July, 2018, 09:16:37 PM »

A lot to take in for one night, I promise to try some more if there is an appetite for it?

I'm starving! More please!
Guy
Logged
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #151 on: 22 July, 2018, 09:29:45 PM »

With the work to the rear 1/4 to bumper areas (for which I needed to keep mounting the bumper itself) now done I could at last get the car on the tilter frame.
This means bolting a frame front and rear to the car which then mount onto A frames each end which then allow the car to rotate through 360 degrees, full rotation so you can weld at whatever angle you need.
This frame I've used on a few AlfaSuds so thought it could easy enough be adapted to suit the Delta?

Sorry for the poor quality 'phone pictures...


* IMG_20180225_165721.jpg (1938.47 KB, 1944x2592 - viewed 347 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #152 on: 22 July, 2018, 09:31:25 PM »

Rear end awaiting lifting onto frame..


* IMG_20180225_165738.jpg (1772.27 KB, 1944x2592 - viewed 272 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #153 on: 22 July, 2018, 09:36:00 PM »

Tiltable to any angle...


* IMG_20180225_173519.jpg (1850.29 KB, 1944x2592 - viewed 298 times.)

* IMG_20180225_173548.jpg (1930.31 KB, 2592x1944 - viewed 280 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #154 on: 22 July, 2018, 09:37:11 PM »

Roof just clears the floor by a few inches...



* IMG_20180225_174124.jpg (1745.04 KB, 2592x1944 - viewed 269 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #155 on: 22 July, 2018, 09:40:39 PM »

The reason for turning the car upside down was to gain better access to the rear suspension turrets and make the repairs much easier.

This was what was left of the inner rear arch and strut top to fathom out...not pretty!



* CIMG0699.JPG (2203.58 KB, 3072x2304 - viewed 283 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #156 on: 22 July, 2018, 09:43:09 PM »

Majority of the strut mount was OK, just the side return section needed cutting out. This is also the piece that's inside the car towards the inner C pillar near the seat belt point, mine was the fully floating type!



* CIMG0718.JPG (2255.03 KB, 3072x2304 - viewed 277 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #157 on: 22 July, 2018, 09:44:51 PM »

A repair piece was made up from the same thickness 2mm steel as the rest of the tower.


* CIMG0721.JPG (2227.8 KB, 3072x2304 - viewed 301 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #158 on: 22 July, 2018, 09:46:16 PM »

As viewed from inside the car...


* CIMG0723.JPG (2219.84 KB, 3072x2304 - viewed 308 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #159 on: 22 July, 2018, 09:49:07 PM »

Joining section for the inner C pillar, again the access to repair was much easier on the tilter frame.


* CIMG0728.JPG (2311.34 KB, 3072x2304 - viewed 282 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #160 on: 22 July, 2018, 09:50:46 PM »

Reunited!


* CIMG0731.JPG (2168.95 KB, 3072x2304 - viewed 266 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #161 on: 22 July, 2018, 09:53:27 PM »

The inner rear arch was another item that I had little idea of what it should look like as there was nothing much to remove!

Simplest option was to start building it up in manageable sections..


* CIMG0784.JPG (2237.82 KB, 3072x2304 - viewed 255 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #162 on: 22 July, 2018, 09:57:08 PM »

The section for under the arch itself was a bit more tricky, it needed to follow the contours of the outer arch closely to be a tight fit to weld but made from strong enough steel to be usefully strong.


* CIMG0782.JPG (2264.7 KB, 3072x2304 - viewed 233 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #163 on: 22 July, 2018, 09:59:09 PM »

All welded in, not the prettiest but solid again.


* CIMG0788.JPG (2177.42 KB, 3072x2304 - viewed 257 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #164 on: 22 July, 2018, 10:00:32 PM »

At last, no view of the road through the rear light opening!


* CIMG0791.JPG (2223.25 KB, 3072x2304 - viewed 242 times.)
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Pages: 1 ... 6 7 8 9 10 [11] 12 13 14 15 16 ... 31   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.053 seconds with 21 queries.