Lancia Motor Club Forum Banner
28 March, 2024, 05:37:56 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Grale Evo hub bushes  (Read 3726 times)
0 Members and 1 Guest are viewing this topic.
Evo1
Lapsed
Member
***
Posts: 39



« on: 20 June, 2015, 01:04:36 PM »

Does anyone know how to remove the rear hub to trailing arm bushes, had a go today with the usual large sockets and threaded bar with no luck Cry, do you need to heat the hub up on these?
Logged
Dikappa
Megaposter
*
Posts: 553


« Reply #1 on: 21 June, 2015, 08:43:08 AM »

Most of the times I succeed to get the rubber out with the 'large socket/piece of tube and treaded bar trick', but leave the outer bush in situ.  I then mount my iron saw with the blade through the hole and cut the outer bush, thus freeing it.

Has worked several times this way.
Logged
Evo1
Lapsed
Member
***
Posts: 39



« Reply #2 on: 21 June, 2015, 05:31:00 PM »

Dikappa,
 
I was thinking along the same lines in removing it as it certainly wont come out with the current method, did you manage to wind in the new bush with the same method, a sochet that was the same size as the steel casing and how easy/difficult is it to get the new one back in, i assume garages would have removed the hub and used a hydraulic press?



* delta hub bush.JPG (499.96 KB, 1632x1224 - viewed 395 times.)
« Last Edit: 21 June, 2015, 05:37:08 PM by Evo1 » Logged
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #3 on: 21 June, 2015, 07:13:43 PM »

To help refitting, can you freeze one or other piece to make it smaller ?
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
Dikappa
Megaposter
*
Posts: 553


« Reply #4 on: 22 June, 2015, 05:48:42 AM »

When on car as far as I recollect Always cmanaged to get the new busches in with the threaded bar method.  Off car I cuse the workshop hydraulic press. 
Logged
Evo1
Lapsed
Member
***
Posts: 39



« Reply #5 on: 22 June, 2015, 11:23:07 AM »


Thanks to both of you who provided advice, hadnt realy thought about freezing the new bush, will probably freeze the bush and heat the hub and see how things go
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.071 seconds with 21 queries.