Lancia Motor Club Forum Banner
04 July, 2022, 10:15:05 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail, for Database Administrator e-mail      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail      -      To Join the club go to
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
Author Topic: Fulvia Sump/Gearbox Plug  (Read 1243 times)
0 Members and 1 Guest are viewing this topic.
Tim Ray
Senior Member
Posts: 103

« on: 13 November, 2014, 08:28:51 PM »

Can anybody please recommend a source. I need to replace all 3. I understand that 1 x Engine and 2 x Gearbox are the same size and that
 S1, 2 and 3 use the same plugs. Non Lancia parts seem fairly cheap on e-bay but I don't have the dimensions.
Most modern plugs seem to come with a Copper Washer. I was reading that for a Fulvia, a Fibre type was best. Any thoughts or comments.
Many Thanks
Posts: 425

« Reply #1 on: 14 November, 2014, 07:03:14 AM »

Hi Tim, this company makes and sells the magnetic plugs you are looking for: Some  time ago I bought a few from them and they were absolutely OK. I have not seen any difference between copper or fiber washers as long as they have the correct diameter. BTW, when fitting new points to the distributor, it is very useful to set them with a dwell angle meter (57 +/- 3 degrees) and it is important to check the ignition timing that is bound to be altered. Andrea

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Pages: [1]   Go Up
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.066 seconds with 20 queries.