Lancia Motor Club Forum Banner
28 March, 2024, 08:42:12 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 2 [3] 4 5 6 7 8 ... 54   Go Down
  Print  
Author Topic: Story so far series 1 resto  (Read 305450 times)
0 Members and 1 Guest are viewing this topic.
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #30 on: 25 April, 2014, 05:44:31 PM »

Hi all, bit more progress made today. I have managed to get a few wires terminated on the cleaned up fusebox.


* wiring 011.JPG (86.13 KB, 640x480 - viewed 773 times.)

* wiring 012.JPG (82.86 KB, 640x480 - viewed 801 times.)

* wiring 013.JPG (80.5 KB, 640x480 - viewed 815 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #31 on: 25 April, 2014, 05:50:07 PM »

Great progress !

First , second and third series Appias all being done at the same time - interesting to see the differences and similarities between them
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #32 on: 25 April, 2014, 05:50:27 PM »

I also managed to get the rusty spiral conduit to the front lights replaced with some natty tubing and glands. I first continued the wrapping of the looms and when the pipes were in (after removing the ends of the old spiral pipes and widening the hole a wee bit) I could feed the mini looms through. The gland  threads fit the hole in the back of the headlamp bowl so should be an easy job to get the headlamps wired in.


* wiring 002.JPG (76.59 KB, 640x480 - viewed 733 times.)

* wiring 004.JPG (48.14 KB, 640x480 - viewed 760 times.)

* wiring 005.JPG (57.16 KB, 640x480 - viewed 781 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #33 on: 25 April, 2014, 05:52:29 PM »

a few more pics


* wiring 006.JPG (81.48 KB, 640x480 - viewed 775 times.)

* wiring 007.JPG (46.9 KB, 640x480 - viewed 760 times.)

* wiring 009.JPG (67.08 KB, 640x480 - viewed 763 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
chugga boom
Non-LMC Seller
Permanent resident
**
Posts: 1754



« Reply #34 on: 25 April, 2014, 07:21:49 PM »

I like the conduits, where do you get them from??
Logged

1935 augusta lusso (chugga)
1935 belna saloon
1935 augusta lusso
1938 ardenne
1939 aprilia lusso
1958 appia s2
1963 appia s3 
195? appia camioncino
1972 fulvia 1600HF
1976 fulvia coupe
194? ardea SUV  "THE BEAST!!!"
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #35 on: 26 April, 2014, 07:29:37 PM »

Hi the conduits come from an Aladdins cave of goodies aka Vehicle Wiring Products Ltd    http://www.vehicle-wiring-products.eu/VWP-onlinestore/sleeving/sleeving.php

Managed a bit more today but have ran out of cable , more is on the way. The next job is to mod the dashboard so the series 2 ignition switch will fit.
the fusebox is looking a bit better and under the dash we are getting some new cabling in.


* more wiring 002.JPG (77.32 KB, 640x480 - viewed 716 times.)

* more wiring 003.JPG (78.64 KB, 640x480 - viewed 736 times.)

* more wiring 004.JPG (93.18 KB, 640x480 - viewed 715 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #36 on: 30 April, 2014, 09:10:50 PM »

Hi all
bit more progress today as the new wire came


* more wiring + horn 006.JPG (367.65 KB, 1200x1600 - viewed 490 times.)

* more wiring + horn 007.JPG (321.59 KB, 1600x1200 - viewed 468 times.)

* more wiring + horn 009.JPG (419.04 KB, 1600x1200 - viewed 526 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #37 on: 30 April, 2014, 09:17:29 PM »

had a play about with the horn as the button in the wheel didn't move and I couldn't get a circuit through to the fuse box and horns. I stripped all the cover off and dipped the button in some hot water and it popped out. A quick clean and a bit of grease on the little spring and it was clicking away merrily. so back on the car and guess what?  you already know the answer a disconnection between the horn push and the fusebox.


* more wiring + horn 001.JPG (144.04 KB, 1600x1200 - viewed 503 times.)

* more wiring + horn 002.JPG (391.66 KB, 1600x1200 - viewed 532 times.)

* more wiring + horn 004.JPG (411.42 KB, 1600x1200 - viewed 456 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #38 on: 30 April, 2014, 09:25:43 PM »

word of warning the plastic on the appia emblem is made of what I don't know but melts pdq when you spray carb cleaner on it. update on the horn when I was taking out some cables from the junction box the feed to the horn and the headlamp relay where bridged out, seems like the elves found the wire was broken when the world was a much younger place and bodged it so I guess when you flashed the lights the horn beeped. to get to the wire looks like the steering column will have to come out oh dear. might have to be a dash button for now.


* more wiring + horn 003.JPG (266.17 KB, 1600x1200 - viewed 474 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
fay66
Permanent resident
**
Posts: 6189



« Reply #39 on: 30 April, 2014, 09:56:38 PM »

word of warning the plastic on the appia emblem is made of what I don't know but melts pdq when you spray carb cleaner on it. update on the horn when I was taking out some cables from the junction box the feed to the horn and the headlamp relay where bridged out, seems like the elves found the wire was broken when the world was a much younger place and bodged it so I guess when you flashed the lights the horn beeped. to get to the wire looks like the steering column will have to come out oh dear. might have to be a dash button for now.

Not familiar with Appias  but what was the original horn operation? my Fulvia Series 1 2c Berlina sounds the same with the 'horn' push button in the centre of the steering wheel being the headlamp flasher, while the horns are operated by a large chrome ring also on the steering wheel.
Dash button sounds good but I remember back in the days when I had Minis that my horns were wired up to a spring loaded switch on an extended arm which made it easier to reach.

Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #40 on: 01 May, 2014, 05:31:55 PM »

Hi
seems the centre button is the horn , the diagrams I have show contacts springs ,brushes etc all to do with the horn no mention of flashing the lights. It is a steering wheel off job with a tube down the inside of the column carrying the cables for the light switch and horn?
Anyway got a bit more done today, light switch, wiper switch and ignition switch all in.


* 001.JPG (371.03 KB, 1600x1200 - viewed 480 times.)

* 002.JPG (277.42 KB, 1600x1200 - viewed 481 times.)

* 004.JPG (374.82 KB, 1600x1200 - viewed 450 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #41 on: 01 May, 2014, 08:04:53 PM »

Interesting to see the wiring coming along. I have that to do still. If you want to change the steering wheel centre, I have a spare (new) hornpush.
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #42 on: 02 May, 2014, 05:47:44 PM »

Hi all
thanks Simon for the offer of the new wheel button, i will see what can be done with the old one first. Onto the wiring again , decided to abandon the loom going to the rear lights etc and put a new one through the car so I sawed the old one off under the dash (see pic) it is looking alot more modern under the dash now with just a few more switches to wire in and I can wrap the loom and tidy it all up. i am missing the flasher return switch under the bonnet so will just lay the cables in ready. Guess what? I've ran out of cable again and I still have a few long runs to do to the back of the car. Still toying with the idea of replacing the back lights with something more modern and a lot safer. I will put the extra cables in anyway so no probs if I decide to upgrade the rear lights. Any requests for the new wire colour? i will order it tonight or tomorrow. I estimate to have used nearly 50m of cable already.
Clarkey


* 001.JPG (291.42 KB, 1600x1200 - viewed 443 times.)

* 037.JPG (427.61 KB, 1600x1200 - viewed 470 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #43 on: 02 May, 2014, 06:10:44 PM »

I would be tempted to keep the original lights, make sure the reflectors and lenses are all clean so work to their maximum effect
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
DavidLaver
Permanent resident
**
Posts: 4365



« Reply #44 on: 02 May, 2014, 07:39:46 PM »

I'll have to dig out photos but my B20 got rubberlite little round things in the back window to give high level brake lights and amber indicators.  To me both safer than original or replacement while keeping the outside of the car standard - or in my case to get the rear lights back to standard.

They were a bit like this - amber and red.

http://www.holden.co.uk/displayproduct.asp?sg=1&pgCode=010&sgName=Electrical&pgName=Lighting&agCode=0040&agName=Side+and+Flasher+Lamps&pCode=010.153

I also added little chrome rectangular lights under the bumper for reversing and rear fog.

http://www.holden.co.uk/displayproduct.asp?sg=1&pgCode=010&sgName=Electrical&pgName=Lighting&agCode=0062&agName=Reverse%2FRear+Fog+Lamps&pCode=010.452

http://www.holden.co.uk/displayproduct.asp?sg=1&pgCode=010&sgName=Electrical&pgName=Lighting&agCode=0062&agName=Reverse%2FRear+Fog+Lamps&pCode=010.451

...and a heated rear window, two speed wipers and electric washers with four jets and a big tank.  My first priority was wiring and with those mods I had in mind a late return journey in bad weather.  Going places is always great fun, its getting home again that can grind and being able to see and being confident of being seen (even at a B20's pace!!) takes a lot of the strain out of it. 

I had a pair of door mirrors as well, but that's a London thing with all our weird five lane wide one way junctions and roundabouts where stopping to have a really good look is more dangerous than keeping your foot down and going for the gap.

David
Logged

David Laver, Lewisham.
Pages: 1 2 [3] 4 5 6 7 8 ... 54   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.082 seconds with 21 queries.