Lancia Motor Club Forum Banner
28 November, 2021, 12:50:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 ... 10 11 12 13 14 [15]   Go Down
  Print  
Author Topic: E55 LBR the parallel project  (Read 31828 times)
0 Members and 1 Guest are viewing this topic.
frankxhv773t
Permanent resident
**
Posts: 2036



« Reply #210 on: 06 August, 2021, 06:02:25 PM »

Fascinating that the 50 hp in the 4x4 has higher horsepower at higher revs with less torque than the standard car whereas I would have expected it to be the other way round. Does the manual show different compression ration, cam timing or anything to explain the extra power Brian?
Logged
Kevinlincs
Permanent resident
**
Posts: 1138


« Reply #211 on: 06 August, 2021, 07:09:57 PM »

Does the 4X4 have a Cat?
Logged
lancianut666
Permanent resident
**
Posts: 1396


Slow but rough


« Reply #212 on: 06 August, 2021, 09:47:10 PM »

Not the early ones... It looks like a different camshaft and distributor account for the differences... I'll put the power and torque curves up tomorrow.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1396


Slow but rough


« Reply #213 on: 07 August, 2021, 08:28:03 AM »

page from the manual

* power curves.pdf (149.61 KB - downloaded 28 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Kevinlincs
Permanent resident
**
Posts: 1138


« Reply #214 on: 07 August, 2021, 11:00:38 AM »

Interesting. Seems to be at slightly higher revs too, about 5k for the 45bhp engine at 5.3k for the 4X4 which would point to better breathing which could be the different inlet cam, coupled with a different ignition curve?
I mentioned a Cat because maybe the non 4X4 may have one, but then realsied the LX I just sold didn't have a Cat either and that was a 45bhp car so that's not the difference.
Are there differences in the carb? Does the 4X4 have a twin-choke carb? That would allow for more power higher up the rev range. 
Logged
lancianut666
Permanent resident
**
Posts: 1396


Slow but rough


« Reply #215 on: 25 October, 2021, 09:41:12 AM »

Hi all
Thought I had scored a new dizzy cap on ebay for 1.49 but when I opened the box I was surprised to see there were 2 screws to hold it on...Hmmm.... did my car have screws or clips? Of course it has clips so I might have to dig a bit deeper and find a correct one.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
peteracs
Administrator
Rebel Poster
*****
Posts: 813



« Reply #216 on: 26 October, 2021, 04:48:19 PM »

Hi Clarkey

Is it one of these?

https://www.ricambio.co.uk/distributor-cap-fiat-131-132-ducato-lancia-beta

Peter
Logged

Beta Spyder S2 pre F/L 1600
Saab 9-3 1.9Tid Cabrio
lancianut666
Permanent resident
**
Posts: 1396


Slow but rough


« Reply #217 on: 27 October, 2021, 06:47:23 AM »

No it has the connectors in a horizontal plane...I will put a photo up later
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
frankxhv773t
Permanent resident
**
Posts: 2036



« Reply #218 on: 29 October, 2021, 09:13:13 AM »

I think this is what you need: Distributor Cap AUTOBIANCHI Fiat Y10 : PANDA : TIPO : UNO : InterMotor 46420

It shouldn't be hard to find because so many Fiat Fire engined cars used it.
Logged
eog
Senior Member
*****
Posts: 105



« Reply #219 on: 29 October, 2021, 10:16:38 AM »

One here for 9.00
https://www.ebay.co.uk/itm/223088561105?hash=item33f11d4bd1:g:oIkAAOSwfbRbZbL4

CLIP TYPE
« Last Edit: 30 October, 2021, 10:09:47 AM by eog » Logged
lancianut666
Permanent resident
**
Posts: 1396


Slow but rough


« Reply #220 on: 29 October, 2021, 06:18:27 PM »

here is a piccy


* IMG_20211028_121435.jpg (2896.24 KB, 3120x4160 - viewed 12 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Pages: 1 ... 10 11 12 13 14 [15]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.053 seconds with 22 queries.