Lancia Motor Club Forum Banner
28 March, 2024, 05:22:24 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 2 [3]   Go Down
  Print  
Author Topic: Technical information only  (Read 35596 times)
0 Members and 1 Guest are viewing this topic.
davidwheeler
Permanent resident
**
Posts: 1469



« Reply #30 on: 17 August, 2019, 09:08:15 AM »

List of Lancia clours from Paul Mayo

* Colour Reference Table-crop.pdf (437.32 KB - downloaded 4022 times.)
« Last Edit: 20 August, 2019, 08:18:02 AM by davidwheeler » Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #31 on: 17 August, 2019, 10:24:20 AM »

transferred from another thread
I believe the blue seal is sometimes an o ring in some se4vice kits.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
my69S1
Member
****
Posts: 92


« Reply #32 on: 25 December, 2019, 04:38:36 PM »

I found these if anyone is looking to replace their headlight bucket grommets.  They are a perfect fit and the price is right.

http://www.britishwiring.com/product-p/c51409.htm
Logged
LCR1967
Member
**
Posts: 22


« Reply #33 on: 18 February, 2021, 08:51:35 PM »

Another site nearer to home that is good for bits and bobs

https://www.oldtimerbedarf.de/gummi
Logged
davidwheeler
Permanent resident
**
Posts: 1469



« Reply #34 on: 18 February, 2021, 10:53:55 PM »

http://www.lancia.myzen.co.uk/forum/index.php?topic=9873.735    for information on the BOOT LOCK
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Posts: 1469



« Reply #35 on: 01 August, 2021, 09:27:15 AM »

*
Posts: 379
Fulvia valve timing
by
00364 Andrea+Nistri
View Profile Email Personal Message (Offline)
   
   
   
Timing the valves of the Fulvia engine is quite complicated and confusing, and it should not undertaken unless one is confident to know what he is doing. Personally I never used the Lancia manual method and always relied on the 2.2 mm method that I learned from Harry Manning. He actually used to sell these bespoke feeler gauges and of course the accuracy of timing depends on how accurate the gauge is. Basically the method relies on the maximum valve lift that is correct at 2.2 mm ONLY for 818.303 engines. This is important.

Assuming the camshafts, rockershafts, etc are all correctly refitted, the tappets screws of all valves must be wound fully inside the tappets. Then adjust valve clearance for inlet and outlet valves of cylinder 1 for maximum lift (2.2 mm) i.e. back of cylinder 1 cam lobes after turning (by hand) both camshafts in such position. Subsequently, turn by hand intake camshaft clockwise and exhaust camshaft anticlockwise until camshaft marks are aligned. If OK so far, there must be no free play for both valves of cylinder 1. Chain can now be fitted (if not done earlier) to both camshafts with its tensioner spring slackened.
Turn the engine until cylinder 1 is at top dead center (0 on the flywheel flange with 1/4 on the bellhousing) and make sure it is indeed at TDC. Easy to make mistakes here: I use a whistle fitted to the plug hole to signal TDC.
Turn again the engine one full revolution very slowly and check that tappet 1 play starts disappearing as flywheel 0 mark approaches. At 0 there should be no free play and as soon as 0 is passed slowly, there should free play for the exhaust 1 tappet. Retension the tensioner, turn the engine and recheck as above.

If these conditions are not attained for example on the intake camshaft, slacken the tensioner, don't shift the camshaft position and after lifting the chain by hand and carefully removing the intake sprocket wheel (and dowel if present), move it one or two teeth clockwise (advance) or anticlockwise (retard) for setting the intake timing correctly and refit it loose. Retension the tensioner and see if timing is now correct after turning the engine.
The procedure is essentially the same for the exhaust camshafts. If OK, set all valve clearances as per book (0.15 inlet, 0.25 outlet)

If the timing is correct, sprocket bolts can be torqued up and blocked with their locking tabs. It is very important to note that although working with cylinder 1, the distributor must be fitted with rotor firing cylinder 4.

The final check for everything done properly is:
rotor arm firing cylinder 4, timing marks aligned with marks on the camshaft front supports,
piston number 4 at TDC, flywheel zero aligned with 1/4 mark on the bellhousing, free play on inlet and outlet valves of cylinder 4.
I hope this helps. With Harry's method we  never had any problems for a large number of 303 engines over nearly 40 years, Andrea

   Report to moderator   Logged
Andrea Nistri
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Posts: 1469



« Reply #36 on: 11 August, 2021, 09:29:15 PM »

Further details of master cylinder rebuild here   http://www.lancia.myzen.co.uk/forum/index.php?topic=12480.15 
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Posts: 1469



« Reply #37 on: 15 September, 2021, 11:17:43 AM »

Second series wiring diagrams from the Coupe/Sport Instruction book.  I don't know why the key for Coupe s printed twise but there is is...


* 100HFa (Copy).jpg (304.76 KB, 896x1050 - viewed 275 times.)

* 100HFb (Copy).jpg (429.08 KB, 1479x1050 - viewed 232 times.)

* Coupe a (Copy).jpg (381.74 KB, 1006x1050 - viewed 220 times.)

* Coupe b (Copy).jpg (369.96 KB, 1428x1050 - viewed 218 times.)

* Sport a (Copy).jpg (281.93 KB, 879x1050 - viewed 274 times.)

* Sport b (Copy).jpg (420.08 KB, 1472x1050 - viewed 251 times.)
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
nthomas1
Rebel Poster
*
Posts: 845



« Reply #38 on: 20 December, 2021, 05:57:52 PM »

Here is the wiring diagram for the RHD Series 3 Coupe - extracted from the Series 3 Owner's Handbook, second edition.

* a - RHD Coupe - key.pdf (319.6 KB - downloaded 85 times.)
* b - RHD Coupe - diagram.pdf (2243.24 KB - downloaded 101 times.)
« Last Edit: 20 December, 2021, 06:07:47 PM by nthomas1 » Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
davidwheeler
Permanent resident
**
Posts: 1469



« Reply #39 on: 05 January, 2022, 10:10:16 AM »

From Beckerman67


* Sport Windows pdf.png_thumb.png (372.55 KB, 800x566 - viewed 760 times.)
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
Beckerman67
Member
****
Posts: 80



« Reply #40 on: 22 November, 2022, 01:13:18 PM »

 Fulvia S2 Colour Wiring Diagram


* Fulvia Wiring.jpg (234.5 KB, 768x1024 - viewed 165 times.)

* Fulvia Wiring 1.jpg (690.01 KB, 2341x1447 - viewed 123 times.)
Logged
Keithver
Senior Member
*****
Posts: 130



« Reply #41 on: 20 November, 2023, 12:56:57 PM »

During my restoration I made a list of bolts, nuts, washers etc that I needed to buy. It is not a complete list - please use it for guidance.
It is sorted in TAV number for easy reference

* bolts 230217 1.pdf (153.37 KB - downloaded 22 times.)
Logged

'72 series 2 Fulvia 1,3s
Keithver
Senior Member
*****
Posts: 130



« Reply #42 on: 20 November, 2023, 01:01:23 PM »

I have tried to make a comprehensive colour chart for Fulvias - this is what I was able to find out.
It includes colours for the different series with colour chip and a picture of the car in the colour, Including the paint codes

* colours3.pdf (1087.84 KB - downloaded 25 times.)
« Last Edit: 20 November, 2023, 01:19:31 PM by Keithver » Logged

'72 series 2 Fulvia 1,3s
Keithver
Senior Member
*****
Posts: 130



« Reply #43 on: 20 November, 2023, 01:18:27 PM »

I have taken the Torque settings out of the Tech Data, for my series 2, and tried to give better descriptions. I have also sorted them by TAV

* Torque settings 220902 1.pdf (83.65 KB - downloaded 25 times.)
Logged

'72 series 2 Fulvia 1,3s
Pages: 1 2 [3]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.08 seconds with 21 queries.