Lancia Motor Club Forum Banner
27 November, 2021, 02:22:33 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Fitting a child seat in S2 Coupe.  (Read 1653 times)
0 Members and 1 Guest are viewing this topic.
julian
Lapsed
Member
***
Posts: 25


« on: 08 May, 2012, 11:07:12 AM »

Hello Gents
 
Iím planning to take our two year to his first car show next weekend, so need to find a safe way of securing a child seat in the back of the car (71 S2 1.3S Coupe).
 
Iíve got a set of universal inertia belts I acquired some time ago but never fitted, and I recall the Fulvia has a set of rear anchor points, but itís a long time since Iíve had the rear seat out.
 
Any help / advice before I start, anyone done similar?

Many Thanks

Julian
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4394



« Reply #1 on: 08 May, 2012, 11:35:22 AM »

All the anchor points are there even on the C pillar but you have to feel for it as it is behind the vinyl. I did this to my coupe but never used them but I used static belts...
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1988 Delta 1.6GTi
1998 Zeta
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #2 on: 08 May, 2012, 01:59:01 PM »

My brother has a coupe in bits at the moment so if it helps I can take some photos later in the week showing exactly where the points are, but as Tim says they are all there (threaded bosses welded in) usually with a rubber plug in so you shouldn't have any problem putting something safe in.
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
julian
Lapsed
Member
***
Posts: 25


« Reply #3 on: 09 May, 2012, 02:21:00 PM »

Guys

Thanks for the replies, itís good to know the anchor points are all there. Iím going to pull the car out on Saturday and take a look.
I donít think mounting the belts will be too much trouble, the main issue is that I donít want to hack bits out of the interior, as it was fully re-trimmed a few years ago and is really straight.
Iíve a few ideas up my sleeve and if the worst comes to the worst Iíll strap the child seat in the front and stuff his mum in the back  Wink

Thanks again.
Logged
fay66
Permanent resident
**
Posts: 6006



« Reply #4 on: 09 May, 2012, 02:34:22 PM »

Guys

Thanks for the replies, itís good to know the anchor points are all there. Iím going to pull the car out on Saturday and take a look.
I donít think mounting the belts will be too much trouble, the main issue is that I donít want to hack bits out of the interior, as it was fully re-trimmed a few years ago and is really straight.
Iíve a few ideas up my sleeve and if the worst comes to the worst Iíll strap the child seat in the front and stuff his mum in the back  Wink

Thanks again.


You intend cutting her legs off at the knees then Shocked

Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.051 seconds with 20 queries.