Lancia Motor Club Forum Banner
20 October, 2021, 12:36:12 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 2 3 4 5 6 [7]   Go Down
  Print  
Author Topic: Fulvia 2C for 2013?  (Read 43003 times)
0 Members and 1 Guest are viewing this topic.
LanciAlan
Megaposter
*
Posts: 371



« Reply #90 on: 01 November, 2012, 10:29:22 PM »

Rare verbal update from the restorer today - hidden structural work complete, doors re-hung and outer panels loosely tacked in for fit. Just the final joining of these outer panels and then a few gaps  to be welded up and he says it will be ready to collect at the NEC weekend - yippee! Pics to follow.

I'm going to take a punt on the quality of this, as yet unseen, work and bring another car over for the treatment when I am collecting this one. May as well be hung for a Zagato as a Sedan ....

On a related (Fulvia) note, I de-engined the Zagato this weekend in preparation for transporting it to the UK as mentioned above? I have de-engined quite a few Fulvias but this was the first time, apart from the 2C which is probably rarer than the Zag, that I have had to be really careful on account of the delicacy of the bodyshell and the importance of not damaging anything that might be hard to replace. In the end the front corner of the subframe did mangle the front valance a bit on its way out but the valance needed work anyhow. Seems a tighter arc on the Zagato valance than on the Coupés I've de-engined before.



Funny to think of the engine for this alone being worth more than I paid for the whole car in 2005, not to mention the gearbox. Well its sitting outside in all its blue and yellow rocker-covered glory on a trailer down my lane now but I reckon it's safe enough under an anonymous blue tarp ...

We checked twice that we had disconnected/removed everything before lifting the car body off the subframe (pics to follow): electrical wiring, heater plumbing, rad out, clutch, throttle and choke cables, gear knob, steering column, nearly forgot to disconnect the brake calipers .... but can you spot what we DID forget to disconnect? Clue: the thing on the floor behind the engine is an angle grinder.



« Last Edit: 04 November, 2012, 12:16:02 PM by LanciAlan » Logged

Alan Murphy

Lancias that begin with "F" ... and affordable variants beginning with "Z" and "P" ..... and now with added "Y"!
davidwheeler
Permanent resident
**
Posts: 1253



« Reply #91 on: 02 November, 2012, 10:57:36 AM »

Yes.
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
LanciAlan
Megaposter
*
Posts: 371



« Reply #92 on: 03 November, 2012, 10:21:20 PM »

Some more 2C pics just came to hand. I thought I was just needing wings and sills but as you can see the bottom/outer 6 inches all around has needed replacing in many areas. I am totally blown away by the quality and detail of the work going on here....

First a pic of the overall extent of the work - sills on, wings tacked on, repairs to inner arches, front rear valances and rear chassis legs:



At an earlier stage in proceedings, here are the outer and inner wings cut away back to good metal:



New outer sill/cover fitted to align with door gap (work to inner sill shown in an earlier post):



Pratically the whole of both rear chassis legs has been replaced, and new spring hanger mounts inserted:



Outside of lower front corner re-assembled having been partly cut away to repair interior sections (see below) and partly refabricated:



Inside of lower rear corner:



Rear bump stop mount (cutaway version shown in a previous post):



This must have been the worst corner (nearside rear) - everything in sight is new!



Similar story the other side:



Inner rear valance ... with gratuitous factory-effect circles pressed in!:



New corners to boot floor over those chassis legs - look at the curved lip around the edges of the corner sections! These sections are "free-standing" and come close, but are not attached, to the inside of the wing (so small things can fall down into the lower wing corner!):



And finally, my personal favourite - hows this for attention to detail? The left half of this section has been refabricated, including the original pressed-in "X" shape - I'm guessing Bill Lewis was involved. To be honest, I didn't even have the car long enough to know that this panel existed (floor in front corner of engine bay between wheelarch and front bumper - I don't think there's an equivalent coupe panel):


« Last Edit: 04 November, 2012, 12:13:38 PM by LanciAlan » Logged

Alan Murphy

Lancias that begin with "F" ... and affordable variants beginning with "Z" and "P" ..... and now with added "Y"!
Richard Fridd
Permanent resident
**
Posts: 3041



« Reply #93 on: 04 November, 2012, 02:12:21 PM »

Excellent progress and lovely metalwork.the remains of the "X" on my scrapped Sedan wing 99% filler and rust


* What%20is%20it%202-.jpg (138.1 KB, 557x369 - viewed 431 times.)
« Last Edit: 04 November, 2012, 02:15:28 PM by Richard Fridd » Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
HF_Dave
Megaposter
*
Posts: 485


Rust , What Rust !! I don't See any rust !!!


« Reply #94 on: 12 November, 2012, 09:50:13 PM »

Wow ! EXELLENT progress. Cant wiit to see it in the flesh , or mmm, in the Metal . Cheesy
Logged

My Current Cars:

1991 Thema station wagon
1989 Thema 16v
2011 Lancia Delta 3

1977 Beta sedan 2000
1975 Fulvia S3 1.3
1973 Flavia HF 2000 Coupe
1972 Fulvia S2 1.3
1989 Thema 8.32
**Other Makes**
2018 Alfa Giulia
1999 Alfa 156
2009 Fiat Du
LanciAlan
Megaposter
*
Posts: 371



« Reply #95 on: 20 November, 2012, 11:24:05 AM »

Latest update on the 2C following last weekend's NEC roadtrip is on the Irish Lancia Club site here
http://lanciaireland.freeforums.org/crusty-t48.html
« Last Edit: 26 January, 2013, 08:34:00 AM by LanciAlan » Logged

Alan Murphy

Lancias that begin with "F" ... and affordable variants beginning with "Z" and "P" ..... and now with added "Y"!
davidwheeler
Permanent resident
**
Posts: 1253



« Reply #96 on: 23 November, 2012, 02:34:43 PM »

This is beginning to look like Old Boot, my Weymann Lambda saloon which I have totally rebuilt apart from a couple of small bits of wood.   It is now a "replica" I guess!   Keep up the good work  (What was that tale about the executioner's axe?)
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
LanciAlan
Megaposter
*
Posts: 371



« Reply #97 on: 05 February, 2021, 06:41:15 PM »

I’m back 👋🏻 (Hi Brian)
Logged

Alan Murphy

Lancias that begin with "F" ... and affordable variants beginning with "Z" and "P" ..... and now with added "Y"!
lancialulu
Press Officer
Permanent resident
*****
Posts: 4359



« Reply #98 on: 05 February, 2021, 09:41:57 PM »

Hi Alan

Can we see an upto date status of the white 2c?
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1979 2500 Gamma Coupe
1988 Delta 1.6GTi
1998 Zeta
Richard Fridd
Permanent resident
**
Posts: 3041



« Reply #99 on: 06 February, 2021, 09:51:18 AM »

Wecome back Alan, looking forward to updates. Richard
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
fay66
Permanent resident
**
Posts: 6001



« Reply #100 on: 06 February, 2021, 11:22:49 AM »

Hi Alan

Can we see an upto date status of the white 2c?
Welcome back Alan, Grin.
Like Tim I'd be interested to know how OPD 37E's Restoration is getting on.
How is your personal Fleet of series 1 Fulvia Berlinas doing?
Brian
8227  Cool

Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
Pages: 1 2 3 4 5 6 [7]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.067 seconds with 20 queries.