Lancia Motor Club Forum Banner
19 March, 2024, 07:55:43 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: 1600 REBUILD PICS  (Read 7644 times)
0 Members and 1 Guest are viewing this topic.
zagatoboy
Guest
« on: 28 August, 2011, 10:40:33 AM »

Well I finally found a way to reduce my photo's, they aren't very good a sI only used my phone but you can see the state of the so called rebuilt engine with broken head bolt and one was missing totally, also broken piston ring which to be fair if you just hammer them in or try and use one of those ring compressor tools you'll break them anyway.
Brian, you can see the result of the honing tool and also the result of the gasflowing to the head and inlet manifold which i had to have done after snapping a stud off which i could not remove, just fitted my original cromodora's after having them restored.
Next job brakes, will remove all callipers and have them sent away to 'Biggred' who do a lovely job on restoring them and fit new disc's if I can't reface them also thinking of having the carbs rebuilt and restored just to finish it off, i seem to be getting a bit of starvation when accelerating which i think could be carb related, we never used to rebuild carbs, we used the carb centre in London for that and i think they've gone now, there is a place in Watford called Gower and lee that seem to do a nice job? anyone got any suggestions?


* Z-5.jpg (29.4 KB, 400x300 - viewed 468 times.)

* Z-3.jpg (42.35 KB, 400x300 - viewed 435 times.)

* Z-2.jpg (35.61 KB, 400x300 - viewed 450 times.)

* Z-7.jpg (32.9 KB, 400x300 - viewed 429 times.)

* Z-9.jpg (33.46 KB, 400x300 - viewed 397 times.)

* Z-11.jpg (31.41 KB, 300x400 - viewed 421 times.)

* Z-12.jpg (30.42 KB, 400x300 - viewed 431 times.)

* Z-13.jpg (31.37 KB, 400x300 - viewed 432 times.)
Logged
zagatoboy
Guest
« Reply #1 on: 28 August, 2011, 10:43:44 AM »

And the gas flowed bits, this has to be done VERY carefully on 1600's, and now sitting on her Refurbed Cromodora's!


* Z-14.jpg (23.21 KB, 400x300 - viewed 445 times.)

* Z-15.jpg (31.59 KB, 400x300 - viewed 463 times.)

* Z-1.jpg (31.35 KB, 400x300 - viewed 459 times.)

* Z-8.jpg (18.92 KB, 400x300 - viewed 432 times.)

* Z-10.jpg (29.68 KB, 400x300 - viewed 397 times.)
Logged
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #2 on: 28 August, 2011, 11:52:54 AM »

Looks a very nice job. Who did the head?

Hope it goes well.
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
zagatoboy
Guest
« Reply #3 on: 28 August, 2011, 01:58:48 PM »

Headwork was done by Ken Riley engineering in High Wycombe, they used to do our work on Lancia's back in the 70s and 80s so they know them well as it's the same engineers, they do take their time but do a very nice job.
Logged
ColinMarr
Permanent resident
**
Posts: 1641



« Reply #4 on: 28 August, 2011, 05:48:38 PM »

Tony,

Thanks. Looks really good. Did you just fit new standard shells, ends and mains - or did you go undersized?

Who did you work with all those years ago to gain so much useful experience?

Colin
Logged
fay66
Permanent resident
**
Posts: 6189



« Reply #5 on: 28 August, 2011, 05:52:24 PM »

Gower & lee at Watford must do something right as I remember them from the 1960's! there's also a carb specialist at Leighton Buzzard but I can't remember the name off hand, I seem to remember someone on here saying they are usually very busy and it takes months to get your carbs back, although if you can afford to wait they do a good job.
The honing tool certainly looks as though it did a good job.

Brian
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
zagatoboy
Guest
« Reply #6 on: 28 August, 2011, 07:52:56 PM »

Colin, I used all standard shells and rings as the crank and bores were perfect, I used to work for Nigel Hargreaves HF Automotive in the late 70s early 80s, I was brought up on Fulvia's (And all the other models) from general servicing to full rebuilds. Lots of fond memories of Harry Manning and Barry Waterhouse.
Brian, spoke to Gower and Lee and looking at six weeks lead time so they are also very busy.
Logged
roddy
Senior Member
*****
Posts: 188


« Reply #7 on: 03 September, 2011, 05:12:22 PM »

Rebuilding Solex 42DDHF carbs etc.

I recently contacted Gower and Lee about rebuilding a pair of 42s for the 1600HF.   Yes, they knew exactly what to do, but said they were so busy, turn-round time would be 10 - 12 weeks!   So I Emailed Gabiele David of Italian Carburetors, Corlo, Ferrara, Italy - eBay shop Alfa1750s   (I have previously bought Solex jets and etc. from the firm - they can supply almost any size).   20 minutes later he replied, basically saying that if there are no fractures, anything can be done to these carbs to reinstate them to as new.   English seems to be understood and well written.   The firm have a contract with UPS too.

The parcel was uplifted from my house;  3 days later delivered to Corlo, and the machining work started on the day of receipt.   It was completed the next day, and the parcel despatched back to me the following day.

Absolutely superb job :-  Ultrasonic clean;  mounting flange faced;  new bushes for spindles;  choke lightly machined for roundness;  new spindles, butterflies, and setscrews.   It was my choice to strip the carbs to the bare body only, but I suspect if I had sent the complete units, there may well have been new diaphragms and float jets fitted too - (I ordered them separately).   Plus they look like new.   There charges were also very reasonable, and paid through PayPal.

I can only strongly recommend the firm - have a look at their eBay shop to see what is there for sale.   Needless to say, the car engine is now performing superbly as well.

Regards - Roddy
Logged

Roddy Young
Dunfermline, Fife

1970 Fulvia Sport S1 1.3S
zagatoboy
Guest
« Reply #8 on: 03 September, 2011, 06:29:11 PM »

Hi Roddy,
Thanks for that, i'll give them a try, Gower and Lee are still looking at 8-10 week turn around.
I'll let you know how I get on.
Tony.
Logged
zagatoboy
Guest
« Reply #9 on: 04 September, 2011, 12:30:54 PM »

Roddy,
All sorted, carbs off to Italy next week, complete rebuild to as new 200 euros + tax.
Thanks,
Tony. Smiley
Logged
roddy
Senior Member
*****
Posts: 188


« Reply #10 on: 05 September, 2011, 11:10:43 AM »

Hello Tony

Thanks for letting me know.   I hope you will be as satisfied with the service as I was.   The quick turn-round and the charges involved I thought were a major bonus.

Send me a pm if you would like a copy of the latest edition of the "Zagato Register - Fulvia Sport" in PDF - all 29 pages.

Regards - Roddy
Logged

Roddy Young
Dunfermline, Fife

1970 Fulvia Sport S1 1.3S
Nick Gramaglia
Member
****
Posts: 63



« Reply #11 on: 08 September, 2011, 07:41:54 AM »

Hi Roddy

Thanks for posting, I had given up trying to find someone who would re-bush my carb spindles after looking last year.

Off on holiday now, but will be sending them off on my return.

Nick
Logged
Richard Fridd
Permanent resident
**
Posts: 3428



« Reply #12 on: 13 September, 2011, 07:14:24 AM »

Well I finally found a way to reduce my photo's, they aren't very good a sI only used my phone but you can see the state of the so called rebuilt engine with broken head bolt and one was missing totally, also broken piston ring which to be fair if you just hammer them in or try and use one of those ring compressor tools you'll break them anyway.
Brian, you can see the result of the honing tool and also the result of the gasflowing to the head and inlet manifold which i had to have done after snapping a stud off which i could not remove, just fitted my original cromodora's after having them restored.
Next job brakes, will remove all callipers and have them sent away to 'Biggred' who do a lovely job on restoring them and fit new disc's if I can't reface them also thinking of having the carbs rebuilt and restored just to finish it off, i seem to be getting a bit of starvation when accelerating which i think could be carb related, we never used to rebuild carbs, we used the carb centre in London for that and i think they've gone now, there is a place in Watford called Gower and lee that seem to do a nice job? anyone got any suggestions?
i now have a new 'camera' and also need to reduce my photos as i cant post them otherwise-advice welcome.best regards richard
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
DavidLaver
Permanent resident
**
Posts: 4365



« Reply #13 on: 13 September, 2011, 03:22:32 PM »


VSO Image Resizer, now rebranded by the look of it:-

http://www.obviousidea.com/windows-software/light-image-resizer/?source=fromapp
Logged

David Laver, Lewisham.
Nick Gramaglia
Member
****
Posts: 63



« Reply #14 on: 13 September, 2011, 07:07:56 PM »

Hi Richard

I use www.shrinkpictures.com     

Regards

Nick
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.092 seconds with 21 queries.