Lancia Motor Club Forum Banner
28 November, 2021, 12:09:06 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: How do you go about protecting new metal?  (Read 1040 times)
0 Members and 1 Guest are viewing this topic.
ah_sprite
Lapsed
Member
****
Posts: 60


« on: 15 February, 2011, 04:47:46 PM »

Not sure this is the correct part of the forum to be asking, but the question isn't really model specific.

I'm in the process of fitting new sills and s/f boxes to my Fulvia. The question is, what do you all think is the best way to go about protecting the metal inside the sills, that obviously is unpainted.

Logged
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #1 on: 15 February, 2011, 05:09:51 PM »

For those bits that are hidden (inside of sills) paint then with a "weld through" etch primer. Then drill a couple of 10mm access holes and give a yearly squirt of dinatrol or somesuch.

For the subframe boxes I would do the same to the enclosed surfaces, then paint the exposed surfaces again with a good dose of something like dintrol.
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.063 seconds with 20 queries.