Lancia Motor Club Forum Banner
28 March, 2024, 11:46:39 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Starter Motor HF1600  (Read 9012 times)
0 Members and 1 Guest are viewing this topic.
chrissantry
Guest
« on: 14 February, 2011, 06:19:27 PM »

Help required please.
The starter motor on my Fulvia has had an intermittent fault but now has stopped working altogether. (wiring all OK) I took it to a Bosch auto electrician as it is a Bosch motor but he was no help as they no longer stock solenoids or exchange motors for this part. I have had the solenoid off the unit but it seems unserviceable.
 Question : Is this Bosch motor a standard fitting for a Fulvia  , secondly has anyone got one a working example for sale or are able to point me in the right direction for help ?
MOT time looming !!
Cheers
Chris
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #1 on: 14 February, 2011, 06:23:47 PM »

Chris

I assume your HF is 2nd seires. Bosch was standard, and IMO a slightly more robust starter than the alternative Ducellier. A spare starter motor should be easy to source. However have you checked the solenoid on the bench with a battery??

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
chrissantry
Guest
« Reply #2 on: 14 February, 2011, 06:28:09 PM »

Tim,
I hope to check it tonight once I have cooked dinner !
Logged
Neil
Permanent resident
**
Posts: 1280



« Reply #3 on: 14 February, 2011, 07:45:11 PM »

The usual problem is the solenoid, they stick, you were able to get spares at one time for these, a good second hand one might be your best bet.
Logged

Neil   
386

1973 Fulvia S2 1.3
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #4 on: 14 February, 2011, 09:34:47 PM »

Solenoids are usually standard(ish) and rarely change. When I rebuilt my starter motor I did have a scout round for new ones "just in case" but luckily mine was fine.

I did however find quite a few places still apparently making them. You are looking for a Bosch 0 331 302 051 solenoid.

Most of the stuff I found was in China with a minimum order quantity of 1000!

Fourth one down on here http://www.kopex.com.tw/autoparts/SolenoidSwitch/Bosch%20System-htm/6.htm is an equivalent.

I wouldn't suggest you go that far! But if you can't get a good second hand one it may be worth taking that part number to a Bosch dealer, or an automotive electrician. It's likely the same kit was fitted to old Alfa's, BMW's, VW's etc so specialist in those may be worth a call as well.

Good luck
 
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
nistri
Megaposter
*
Posts: 530


« Reply #5 on: 15 February, 2011, 12:04:38 PM »

I am told that the Bosch alternator fitted to the Fiat 128 is a simple replacement with better output. Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
vigzag
Member
****
Posts: 71



« Reply #6 on: 15 February, 2011, 05:15:25 PM »

can supply a used one if still required
Logged

Current cars:-

1964 Flavia 1800 coupe
1966 Flavia 1800 convertible
1968 Flavia 1800 convertible
1964 Flavia 1800 Sport
1965 Flavia 1800 Sport
1966 Flavia 1800 Sport
1967 Flavia 1800 Sport
1974 2000HF
1966 Transit V4 van
LanciAlan
Megaposter
*
Posts: 379



« Reply #7 on: 15 February, 2011, 10:37:42 PM »

I'm sure others know better about the interchangeability of Fulvia starters but I had a recent experience with the Bosch starter motor on my 2000HF that may be helpful.

My Bosch starter lost efficiency and eventually failed due to wear in the bronze/brass bush(ing) that carries the armature at the business end - i.e. the pointy end nearest the flywheel.

I assumed that a Ducellier starter from a non-HF 2000 parts car that I have (though it could have been from a Fulvia) would fit but, while it did start the engine, it wouldn't disengage!

So I would sound a cautionary note on interchangeability of starters as the number and profile of the teeth on the flywheel may be different across different Fulvia variants too! The Bosch starter is a lot "meatier" than the Ducellier.

The good news is that all this happened in quite remote parts while on holiday last year but, these also being rural agricultural parts, there was a pretty low key outfit in a shed nearby that had a very welcome "Bosch Service" sign (and not much else) outside and that specialised in auto electrical repairs for all sorts of machines and vehicles.

My 30+ year old starter was greeted with some nostalgia but also some recognition. The engineer told me there were "overhaul kits" available for many types of Bosch starter and that he could also have a new bushing machined up locally. I had it back good as new for €100 2 days later. As a precaution, I had the same work done on the Bosch alternator soon after but at a different centre.

So you need a "Bosch Service" centre that is used to repairing rather than replacing!
« Last Edit: 15 February, 2011, 11:19:42 PM by LanciAlan » Logged

Alan Murphy

Lancias that begin with "F" ... and affordable variants beginning with "Z" and "P" ..... and now with added "Y"!
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #8 on: 15 February, 2011, 11:24:53 PM »

You're right about the fulvia. The S1 flywheels have 104 teeth and S2 flywheels have 126 teeth. Also the fixing bolts on the starter motor have a different PCD and the Fanalones have a mixture of the two and the early fanalones have a different throw as well.
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
chrissantry
Guest
« Reply #9 on: 16 February, 2011, 12:00:42 PM »

Thanks for all your replies,
 It does appear to be the solenoid as I have taken it off powered it up and no response. The brushes in the motor are sound but worn. I tried a Bosch auto electrician but they tell me this part is listed but unavailable. I think a local auto electrician is needed to see if they have something lying around  in the corner! That is unless anyone has one in their garage .
Cheers Chris
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #10 on: 16 February, 2011, 12:14:03 PM »

Chris

sent you a pm.

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
angelorange
Megaposter
*
Posts: 324



WWW
« Reply #11 on: 19 February, 2011, 10:10:23 AM »

Overhaul is still possible by most Auto electrical workshops or you could get a much better (More energy efficient, Higher torque and lighter) unit (LMS 176   Denso 1.4kW) form Luke Motorsport which was developed especially for Fulvias - let him know number of teeth on old unit:

http://www.wosperformance.co.uk/

http://www.turbosport.co.uk/showthread.php?144676-Luke-motorsport-(wosp)

Pics of unit for my road/racer:

http://web.me.com/ekranoplan/LUKAFOTORACING2/page19/page19.html

KR

Logged

I'm entitled to my ignorance!
lanciab20
President
Member
*****
Posts: 44


« Reply #12 on: 12 March, 2011, 08:46:47 AM »

I got an exchange unit from Omicron.  Fast delivery, and with a guarantee.  Not cheap, but good value in my view.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.088 seconds with 20 queries.