Lancia Motor Club Forum Banner
19 June, 2021, 09:11:04 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: suspension  (Read 2050 times)
0 Members and 1 Guest are viewing this topic.
Richard Fridd
Permanent resident
**
Posts: 3003



« on: 18 October, 2010, 04:23:05 PM »

 i have been given a set of nylon bushes to fit to the wishbones.could someone tell me how to fit these to my sedan which is currently on high axle stands having just had sill/floor work done as the lower wishbones/bushes are nicely accessible at the moment.i was wondering if a press is required or if the job can be done with things in situ.help with this question appreciated.best regards richard
Logged

Richard Nevison Fridd
lancialulu
Press Officer
Permanent resident
*****
Posts: 4251



« Reply #1 on: 18 October, 2010, 08:26:58 PM »

I think you would need to at least drop the arms and use a vice or some such to press out/in with a lot of silicone spray.

Tim
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1979 2500 Gamma Coupe
1988 Delta 1.6GTi
1998 Zeta
Richard Fridd
Permanent resident
**
Posts: 3003



« Reply #2 on: 19 October, 2010, 02:41:49 AM »

thanks Tim,looks like the arms will be coming off then.richard
Logged

Richard Nevison Fridd
lancialulu
Press Officer
Permanent resident
*****
Posts: 4251



« Reply #3 on: 19 October, 2010, 08:43:20 PM »

Thinking about it you may need to butcher the old bushes with a hacksaw through them as they will be well stuck I reckon.

Tim
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1979 2500 Gamma Coupe
1988 Delta 1.6GTi
1998 Zeta
Richard Fridd
Permanent resident
**
Posts: 3003



« Reply #4 on: 28 January, 2011, 12:09:26 PM »

arms removed/bushes butchered using the following method:remove innermost pressed on bush 'washers'-easily with drift or chisel.heat bushes with blowlamp.once hot the bushes expand and exit the outermost face of the arm with no further human input![smokey work]then a hacksaw to cut through the remaining bush sleeves which can then be drifted out.i pressed new bushes[those purple ones in thesedan thread] in after checking the inner sleeves fitted the ally suspension uprights and machining the lengthdown slightly.best regards richard
Logged

Richard Nevison Fridd
zagatoboy
Guest
« Reply #5 on: 29 January, 2011, 08:09:40 AM »

Nice and easy then Richard! Grin
Logged
Richard Fridd
Permanent resident
**
Posts: 3003



« Reply #6 on: 29 January, 2011, 11:12:24 AM »

hi Tony,easy enough with time and patience and a warm workplace-as usual stubborn fasteners taking the majority of the time[the hub nut on one side still not moving even when it barely had any apparent strength left.not urgent but i will replace the top bushes sometime which fit in the ally uprights.advice welcome on that task!i have a tool to take the tension off the top wishbone so just need to know how to get the existing bushes out.best regards richard
Logged

Richard Nevison Fridd
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.071 seconds with 21 queries.