13 December, 2024, 06:36:59 AM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Need to contact the Forum Administrator? e-mail
forum.admin@lanciamc.co.uk
- Copy deadline for Viva Lancia is 12th of each month. - For Events e-mail
events@lanciamc.co.uk
- To Join the club go to
http://www.lanciamc.co.uk/join.htm
Home
Help
Search
Calendar
Register
Lancia Motor Club
>
Model Technical and Interest
>
Fulvia
>
Advice: S1 Fulvia Zagato clutch
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Advice: S1 Fulvia Zagato clutch (Read 619 times)
0 Members and 1 Guest are viewing this topic.
julian67
Member
Posts: 48
Advice: S1 Fulvia Zagato clutch
«
on:
28 October, 2024, 06:34:51 PM »
Hi
After 28 years of not being driven, I finally got my S1 Fulvia Zagato engine running. Sounds healthy but carbs need tune up idling uneven & high).
The car moved back & forth on a ramp but the pedal was very high. I almost thought there was no clutch. Plenty of pedal pressure.
1) Could it just be a matter of adjusting the clutch?
2) Where is the adjustment?
3) Or, do I have to remove / fit a new clutch pressure plate + clutch + release bearing?
4) Does the engine have to be removed or, can the clutch be removed by dropping the gearbox?
Many thanks
Logged
GlynW
Member
Posts: 56
Fulvia S2 1600HF (1971)
Re: Advice: S1 Fulvia Zagato clutch
«
Reply #1 on:
30 October, 2024, 12:34:57 PM »
Hi Julian,
I would start by checking the adjustment of the clutch cable in the engine compartment (photo attached). If the clutch action is at the top of the pedal travel, the cable may be too tight. Its possible that this was done when the car was put in storage in order to move the clutch plate away from the flywheel, in case it got stuck.
Let's hope it is that simple!
Glyn
Clutch Cable Adjustment.png
(89.37 KB, 686x304 - viewed 211 times.)
Logged
julian67
Member
Posts: 48
Re: Advice: S1 Fulvia Zagato clutch
«
Reply #2 on:
01 November, 2024, 08:18:42 AM »
Many thanks Glyn. Very helpful indeed.
Logged
julian67
Member
Posts: 48
Re: Advice: S1 Fulvia Zagato clutch
«
Reply #3 on:
02 November, 2024, 02:59:26 PM »
Well I adjusted the clutch (pedal still high before car moves), switched on the engine, engaged the clutch. I heard a grating noise, so I suspect a new clutch.
Would anyone go through the procedure?
Engine out?
Or, just drop the gearbox?
Many thanks
Logged
lancialulu
Press Officer
Permanent resident
Posts: 5056
Re: Advice: S1 Fulvia Zagato clutch
«
Reply #4 on:
02 November, 2024, 09:21:52 PM »
I always drop the gearbox on a Fulvia.
Logged
Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21. 12v
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> About the LMC Forum
=> General Chat
=> Press/Media: Lancias mentioned, seen or wanted!
=> Competition Information
=> Events 2024
=> Events 2025
=> Local Events
=> LMC Legends
=> Links
-----------------------------
Model Technical and Interest
-----------------------------
=> Pre-Lambda
=> Lambda
=> DiLambda
=> Artena and Astura
=> Augusta
=> Aprilia, Ardennes and Ardea
=> Aurelia
=> Appia
=> Flaminia
=> Flavia
=> Fulvia
=> Stratos
=> Beta and Montecarlo
=> Gamma
=> Delta and Prisma
=> Dedra, Thema and Delta (2nd series)
=> Ypsilon, Musa and Y10
=> Kappa
=> Thesis
=> Delta (2008-)
=> Commercial Vehicles
=> Other Lancia Models
-----------------------------
Buy, Sell and Search
-----------------------------
=> Members' cars for sale
=> Lancia vehicles for sale
=> Lancia vehicles required
=> Spares for sale
=> Spares required
-----------------------------
Events Archive
-----------------------------
=> Events 2011
=> Events 2012
=> Events 2013
=> Events 2014
=> Events 2015
=> Events 2016
=> Events 2017
=> Events 2018
=> Events 2019
=> Events 2020
=> Events 2021
=> Events 2022
=> Events 2023
Loading...