Lancia Motor Club Forum Banner
31 October, 2024, 11:26:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: S2 Fuel and brake lines tips  (Read 1578 times)
0 Members and 1 Guest are viewing this topic.
cundyalex
Lapsed
Member
**
Posts: 10


« on: 04 December, 2023, 11:06:58 PM »

Greetings fellow Fulvia owners,

I'm a new member so just introducing myself. I ought to have joined a long time ago but better late than never! Don't want to clog the thread up but just a little background about my car..

I've had my 1972 1.3 Coupe since about '96 when I got it from my brother (who posted a lot here about his Fanalone). It looked OK but it was my daily driver, lived outside, did a lot of miles and became a bit of a basket case in the end, although I always looked after it well mechanically. It had a 1600 engine for the last couple of years and it always went and stopped well.

Before that I ran an S2 Berlina, which really was a super little car.

I took the Coupe off the road in 2003 to do a bit of work on the body and ended up (very) slowly doing the whole shell properly, with the help of my Dad. It was finally painted in Jan this year.

Anyway - to cut to the question - I know my way around most jobs on a Fulvia but I'm just about to start putting it all back together again and wondered if anyone had any tips about installing the main fuel/brake lines.

It's the sort of job that I can imagine not being obvously wrong until it's too late and then having to take half the car apart again.

Any help appreciated, I hope I can assist here too in due course and I look forward to letting you all know how quickly and smoothly the reassembly is progressing...!!

Thanks,
Alex




* 20230124_164047.jpg (1420.59 KB, 4608x3456 - viewed 77 times.)
Logged

B20 S4 and Fulvia S2 Coupe
JollyClubUK
Lapsed
Megaposter
*
Posts: 237


1971 Fulvia S2 1.3s fast road spec


« Reply #1 on: 05 December, 2023, 07:35:05 AM »

Welcome to the group, look forward to seeing updates as the build progresses.
Logged
cundyalex
Lapsed
Member
**
Posts: 10


« Reply #2 on: 06 December, 2023, 10:32:28 AM »

Welcome to the group, look forward to seeing updates as the build progresses.

Thanks! I'll post some photos as and when there is something to look at.
Logged

B20 S4 and Fulvia S2 Coupe
lancialulu
Press Officer
Permanent resident
*****
Posts: 5029



« Reply #3 on: 06 December, 2023, 04:56:37 PM »

Hi A;ex

best advise is to get up close and personal with a series 2 coupe that has original lines in place.

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Wangler
Megaposter
*
Posts: 303


« Reply #4 on: 06 December, 2023, 05:38:49 PM »

Certainly worth looking at the Pieces Fulvia website. Lots of good photos and diagrams of the brake system parts which may well help you.

I have found their service to be top class, incredibly fast and very reasonably priced.
Logged

Fulvia Coupe 1976
Fulvia Coupe 3 1975
OldSparky
Member
**
Posts: 18


« Reply #5 on: 07 December, 2023, 10:45:56 PM »

Depends what you do with it - mine (an S1) has lines inside which is a good idea for me ( not that I did it)  for intended use on HRCR events.
Logged
Keithver
Senior Member
*****
Posts: 144



« Reply #6 on: 09 January, 2024, 02:39:21 PM »

here is a pic I took of the fuel lines before stripping the car (original I presume).
I obviously wasn't careful enough when installing the new lines and the thick line wore through on the rear gearbox mount. The gap between the mount and the body looked fine, but obviously not when the car is running. I cut the the line to the rear of the mount, flared the end of the pipe and replaced it with a rubber hose to the fuel pump. I made sure that it is now out of the way.


* IMG_2020a.JPG (329.01 KB, 1008x756 - viewed 62 times.)
« Last Edit: 09 January, 2024, 02:44:32 PM by Keithver » Logged

'72 series 2 Fulvia 1,3s
cundyalex
Lapsed
Member
**
Posts: 10


« Reply #7 on: 17 January, 2024, 09:59:00 PM »

Thanks for the pic, that's really useful. Cheers.
Logged

B20 S4 and Fulvia S2 Coupe
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.033 seconds with 21 queries.