Lancia Fulvia break callipers

ColinWilson

Member

Posts: 6

« on: 05 May, 2023, 11:54:57 AM »

Hi all,
I'm after advice again! My break callipers need refurbing on my Lancia Fulvia S1. Would your advise be to buy refurbed callipers or is it at all possible to buy then new? Hope you can help. Kind regards Colin


	Logged

lancialulu

Press Officer
Permanent resident

Posts: 4912

Re: Lancia Fulvia break callipers

« Reply #1 on: 05 May, 2023, 02:55:19 PM »

You can buy new. There are several sources of pattern parts. There are modern alternatives to the Girling Callipers. The key though is to make sure the calliper diameters are correct. Rear brake callipers are smaller.

Past Parts or Big redd should be able to refurbish though.


	Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21. 12v

Sebastien

Megaposter

Posts: 552

Re: Lancia Fulvia break callipers

« Reply #2 on: 05 May, 2023, 04:27:34 PM »

Pieces-Fulvia in France has all parts required. Also of course Cavalitto in Turin.

S1 Fulvia need Dunlop callipers, or similar - see:

https://www.pieces-fulvia.com/front-calliper-dunlop-o54mm-lancia-fulvia-series-1.htm

Check required diameter (front / rear) before purchase.


« Last Edit: 05 May, 2023, 04:29:58 PM by Sebastien »	Logged

ColinWilson

Member

Posts: 6

Re: Lancia Fulvia break callipers

« Reply #3 on: 11 May, 2023, 09:11:20 AM »

Thanks for the advice!!!!


	Logged

Pages: [1] Go Up

« previous next »

	Author	Topic: Lancia Fulvia break callipers (Read 755 times)
0 Members and 1 Guest are viewing this topic.