Lancia Motor Club Forum Banner
19 April, 2024, 01:05:08 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Loud rotational knocking  (Read 1666 times)
0 Members and 1 Guest are viewing this topic.
Biglee0_1
Member

Posts: 3


« on: 12 July, 2022, 04:47:12 PM »

Good evening all. I have developed a very loud knocking, under power and rotational from the front end. It dissipates when not in gear. Well the flavia developed the knocking! Not me. I have cleared out the 'oil' from the cv joints, as I think this is the old grease broken down, and re packed with moly grease. It disappeared for a few miles, but came back with avengence. Does any one have inner and outer cv joints? I would like to change them all and remove worn cv joints from my list! Is there a test to see, or measure the amount of acceptable wear? I may have to move on to the differential as my next move.
#
Thank you so much.......Lee.
Logged
Biglee0_1
Member

Posts: 3


« Reply #1 on: 14 July, 2022, 09:37:15 AM »

As an extra comment, does anyone know if these are interchangeable with any other models, or if there any suppliers in the UK. Omicron are looking, but not much joy! Thank you again.
Logged
Neil
Permanent resident
**
Posts: 1288



« Reply #2 on: 14 July, 2022, 10:10:41 AM »

Try the Flavia consortium - Colin Clamp in the back of VL
Logged

Neil   
386

1973 Fulvia S2 1.3
Richard Fridd
Permanent resident
**
Posts: 3434



« Reply #3 on: 14 July, 2022, 11:09:16 AM »

I have these three inners, plus one outer.
I think they are Fulvia s1 and maybe the same as Flavia.
They are from my spares for sale forum post @ £60 each plus post and packing. Or collect Maidstone or Wadhurst.

Richard


* 20220714_120030_resized.jpg (648.72 KB, 918x1632 - viewed 84 times.)
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
lancialulu
Press Officer
Permanent resident
*****
Posts: 4908



« Reply #4 on: 14 July, 2022, 04:27:30 PM »

They are relatively easy to strip and rebuild. You can get replacement balls from a good bearing shop  (18mm dia from  memory but you need to check). It may be that the cage have broken in which case you are looking at a good second hand unit. These occasionally turn up on ebay. I doubt the inner joint is the problem and indeed compared to modern cars these and the outer joints are totally over engineered. Do some more investigation to narrow it down.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
A1.6HPE
Senior Member
*****
Posts: 122



« Reply #5 on: 15 July, 2022, 12:16:40 AM »

In my experience a failing CV joint usually clicks when the steering is on full lock. 
Logged

Edinburgh Regional Co-Ordinator
Biglee0_1
Member

Posts: 3


« Reply #6 on: 15 July, 2022, 08:27:07 AM »

Excellent. Thank you so much for your help. I will get both fully stripped down and check out the dimensions. new bearings would be an excellent outcome. Fingers crossed. The Fulvia spares I dont know enough to make the shout, but the chap at Omnicon says there is no other model inter changeable and again i dont know Undecided Undecided
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.098 seconds with 20 queries.