Lancia Motor Club Forum Banner
10 December, 2024, 02:20:15 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Driver's seat frame and slider  (Read 2739 times)
0 Members and 1 Guest are viewing this topic.
John Larkin
Member
****
Posts: 61


« on: 20 May, 2022, 08:27:04 AM »

I'm looking for an original complete Lancia seat base frame and slider mechanism in working or repairable condition for a 1949 Aprilia berlina.  A previous owner replaced the original mechanism with something from a 60s/70s car, and the seat is almost two inches too high.

John

jfllarkin (at) gmail.com
Logged

John Larkin
1949 Aprilia berlina
DavidHill
Senior Member
*****
Posts: 142


« Reply #1 on: 24 May, 2022, 03:23:56 PM »

Hi John,

I may have one, which side do you need? Drivers or passengers?

kind regards
David.
Logged
John Larkin
Member
****
Posts: 61


« Reply #2 on: 24 May, 2022, 03:49:31 PM »

Hi David,
I need a driver's side seat base and slider.  Where are you located?
Regards,
John.
Logged

John Larkin
1949 Aprilia berlina
DavidHill
Senior Member
*****
Posts: 142


« Reply #3 on: 25 May, 2022, 07:10:07 PM »

Hi John,

See below a picture of the spare seat frame i have...it has the slider rails attached and the ratchet/release handle.  Note it is the version that does not recline, its got a fixed back.  I think i have a seat cushion to fit it too.
I am near Woking.  Am sure you could easily make the rails up out of steel that are fixed to the floor to match the rails on this seat.

cheers
David.


* apr seat.jpg (383.3 KB, 960x1280 - viewed 166 times.)
Logged
John Larkin
Member
****
Posts: 61


« Reply #4 on: 26 May, 2022, 05:19:35 PM »

Dear David,
The two front seat bases in my Aprilia have rounded corners at the forward end.  Your seat has one rounded corner and one ninety degree corner.  I think that I may have early seats in my car (well, one early front passenger seat and one bodged driver's seat).  I'll have to investigate further.
Regards,
John.



* Aprilia seat bodge.JPG (2152.26 KB, 3264x2448 - viewed 175 times.)
Logged

John Larkin
1949 Aprilia berlina
DavidHill
Senior Member
*****
Posts: 142


« Reply #5 on: 27 May, 2022, 06:49:05 AM »

Hi John,

yes i think there are a number of types (of course!!!)  I also have one seat base (with no back) that has rounded corners, will try and dig it out...

cheers
David.
Logged
DavidHill
Senior Member
*****
Posts: 142


« Reply #6 on: 27 May, 2022, 06:57:30 AM »

Hi John,

...unfortunately my seat base is a pax side one...is it any use?

(see pics)


* seat 2.jpg (385.36 KB, 1280x960 - viewed 175 times.)
Logged
simonandjuliet
Permanent resident
**
Posts: 2559



« Reply #7 on: 27 May, 2022, 08:09:40 AM »

The top frame in David's pictures is very similar to my Cabrio seat base, otherwise I have only seen the lower frame type
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia, 2xArdea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20s4,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole,LR Defender, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan
John Larkin
Member
****
Posts: 61


« Reply #8 on: 27 May, 2022, 05:07:41 PM »

David's second image of a front passenger seat base appears to be exactly the same as in my car, but mine is bolted directly to the floor and there is no evidence on any sliding mechanism.

I have attached a few images.  The picture of the interior parts (Tav. 64, parts catalogue) seems to suggest that items 7, 8 and 13 are parts of the front seat base frames/slider mechanisms.  Item 7 is a single part number 238-98316 up to chassis number 438/12350, and is replaced by two different part numbers, one left side and one right side,  250-98320 and 250-98316 respectively.

Item 8 (part 238-98317) is listed as being used twice in the car, and item 13 (the big lever at the seat base) is listed as different parts numbers for left and right sides, before and after chassis numbers 438-12350 --- four different part numbers in total.

Items 7 (one off), 8 (two off) and 13 (two off) are absent from my car.

I would really appreciate any information that would clarify what I should have in my car.






* Aprilia parts list 1.png (1177.34 KB, 1280x1024 - viewed 161 times.)

* Aprilia parts list 2.png (1110.19 KB, 1280x1024 - viewed 180 times.)

* Aprilia seat part numbers.png (1762.47 KB, 1280x1024 - viewed 181 times.)
Logged

John Larkin
1949 Aprilia berlina
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.075 seconds with 21 queries.