Lancia Motor Club Forum Banner
28 March, 2024, 09:27:00 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Crack in Fulvia windscreen  (Read 3404 times)
0 Members and 1 Guest are viewing this topic.
robertlphodgson
Member

Posts: 3


« on: 20 May, 2021, 08:16:43 AM »

Hi all,

My Fulvia SII '73 Coupe windscreen has a couple of small cracks in one edge.  I think it is original glass and am wondering if it is worth trying repairing the cracks rather than an expensive replacement.  Has anyone any experience of this? 

My main worry is that the glass may be toughened rather than laminated but I can't tell from the Sicursiv codes.  Can anyone confirm which it will be?  My TripleX windscreens of the same period are marked 'toughened' so I just wonder, having no knowledge of Sicursiv.

Thank you for your help!

Robert
Logged
SanRemo78
Rebel Poster
*
Posts: 826



« Reply #1 on: 20 May, 2021, 08:37:33 AM »

I don't think toughened glass can crack? It just shatters into an awful lot of bits that'll rattle around the car forever. You can never get the last few bits...
Guy
Logged
Neil
Permanent resident
**
Posts: 1280



« Reply #2 on: 20 May, 2021, 10:15:14 AM »

I think you will find it is a laminated screen, as far as I know all Fulvias are laminated. It might be repairable in that case.
Logged

Neil   
386

1973 Fulvia S2 1.3
andyps
Megaposter
*
Posts: 317


« Reply #3 on: 20 May, 2021, 06:23:39 PM »

I've had chips repaired in the past, if it is a big chip you might still be able to tell where it was but it shouldn't be an issue. Quite likely if you don't get a chip repaired it will crack and a replacement screen will be needed.
Logged
eog
Senior Member
*****
Posts: 126



« Reply #4 on: 21 May, 2021, 09:02:16 AM »

I seem to remember that some toughened screens had a strengthen zone in front of the drivers  field of view.
This was designed to allow some vision in the event of a broken screen. This area of glass could be seen if screen viewed at an angle.
Had a brand name of safety zone ??
Maurice
Logged
robertlphodgson
Member

Posts: 3


« Reply #5 on: 21 May, 2021, 09:40:41 AM »

Thank you all.  You are confirming what I was thinking and it's always good to have more expert opinions.  A lot of British cars, like my Triumphs, had/still have 'zone-toughened' TripleX screens that are clearly marked but the Sicursiv screen on the Fulvia has only some codes that I can't track down.  The cracks are about 70-90mm and I will find out if a repair can stop them growing (which they haven't done so far).  Thanks again!
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4901



« Reply #6 on: 21 May, 2021, 10:05:10 AM »

I doubt a repair is available for a crack especially that long.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Richard Fridd
Permanent resident
**
Posts: 3430



« Reply #7 on: 21 May, 2021, 11:54:16 AM »

What about widescreen insurance?
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
davidwheeler
Permanent resident
**
Posts: 1467



« Reply #8 on: 23 May, 2021, 09:34:53 AM »

Laminated for sure.  If the screen is otherwise OK and not badly scratched then a repair is eminently doable and worth it.    If it all goes wrong, Omicron have screens though I do not know how much as mine was replaced under insurance (Hit a moorland pony which galloped off so I guess it survived!).  Go down to your local windscreenist and ask!
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
robertlphodgson
Member

Posts: 3


« Reply #9 on: 26 May, 2021, 06:51:44 AM »

Update: Thank you again, everyone.  Encouraged by your comments, I got our local SuperGlass man to take a look.  He advised that the cracks were in the underside layer of glass and they were told not to repair in that case but, as this was a one off, he'd give it a go and hope that a layer of tape on the underside would retain the resin.  In the process, we confirmed that (a) it is laminated, (b) the tape did retain fluid, and (c) that, due to refraction, it is difficult to drill accurately through the upper layer into the crack below the plastic layer.  However, in the end he succeeded in rebonding both cracks without causing more damage at a cost of £60 +VAT so well worth the experiment.  We both learned a lot!  Happily, the cracks are in front of the mirror/tax disc holder and so any remaining blemishes are not very visible.  We'll see how it goes.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.054 seconds with 21 queries.