Lancia Motor Club Forum Banner
28 March, 2024, 04:45:32 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Rallye S brake system  (Read 2165 times)
0 Members and 1 Guest are viewing this topic.
simonpen
Senior Member
*****
Posts: 115


« on: 15 September, 2020, 04:31:53 PM »

My very knackered rear callipers have 35mm pistons. I was expecting 33mm. Did the S have larger pistons? ta
Logged

1969 Rallye 1.3S
nistri
Megaposter
*
Posts: 530


« Reply #1 on: 15 September, 2020, 05:01:13 PM »

Usually, yes 35 mm. The 33 mm size was normally fitted to the 1.2 coupe, Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #2 on: 15 September, 2020, 05:05:44 PM »

Aren't the Dunlop pistons always measured in inches (marked on the top ) ?

Also, does anyone know the diametre of the master cylindre for the "S" - is it 19mm ? I think my non servo GT has an 18mm bore
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
simonpen
Senior Member
*****
Posts: 115


« Reply #3 on: 15 September, 2020, 07:25:31 PM »

Thankyou Andrea, perhaps I was thinking of my earlier car. My master cylinder is 19mm. 
Logged

1969 Rallye 1.3S
nistri
Megaposter
*
Posts: 530


« Reply #4 on: 16 September, 2020, 01:04:50 PM »

Originally all fulvia rallye S and GTE both had 19 mm brake master cylinders (plus servo). Other S1 cars had 18 mm (non servo).Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.077 seconds with 21 queries.