Lancia Motor Club Forum Banner
10 August, 2022, 08:41:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail, for Database Administrator e-mail      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail      -      To Join the club go to
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
Author Topic: Appia block/ engine  (Read 1239 times)
0 Members and 1 Guest are viewing this topic.
Posts: 34

« on: 03 April, 2020, 02:25:07 PM »

Does anyone have a sound appia s1 block ( ideally capable of being bored to 68.Cool or possibly a good engine for use in my s1 berlina .any help would be really appreciated.
Permanent resident
Posts: 1140

« Reply #1 on: 03 April, 2020, 04:12:07 PM »

I think the Appia Consortium usually have some blocks?

1979 1300 Beta Coupe, 2014 Ypsilon 1.2 S Series Momo
Permanent resident
Posts: 1450

Slow but rough

« Reply #2 on: 03 April, 2020, 06:51:19 PM »

Just sold the only S1 block we had...Thought about converting to a S2/3 engine and transmission? easily done you just replace them as all the mountings line up and the throttle and gearbox linkages are the same. Problem is the S1 gearbox will not fit a S2/3 engine so you need a S2/3 gearbox as well. Another solution would be to have the block sleeve-lined see this link below
We have lots of spare S2/3 blocks as well as reground crankshafts, crankcases, cylinder heads and complete gearboxes.
Jim Appia Consortium manager

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Pages: [1]   Go Up
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.046 seconds with 19 queries.