Lancia Motor Club Forum Banner
29 March, 2024, 11:05:03 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: fulvia gearbox mount  (Read 2835 times)
0 Members and 1 Guest are viewing this topic.
PABA
Member
*
Posts: 5



« on: 29 March, 2020, 03:43:38 PM »

Hi
I’m trying to replace my fulvia s2  gearbox mount as they are past there best. I don’t seem to be able to open up the gap to remove the upper mount has anyone got any tips to help please.

Thanks in anticipation.


Paul
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #1 on: 29 March, 2020, 05:40:21 PM »

If you can, take the 4 bolts the top mount silent block and deal with it on the bench... soak heat etc.   

you might need to move the coil and clutch cable out of the way, and possibly loosen the top 2 bell housing bolts so the mounting gets loose.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
PABA
Member
*
Posts: 5



« Reply #2 on: 30 March, 2020, 10:40:53 AM »

Hello,

thanks for your replay, it's the two mounts on the side of the gearbox I'm trying to replace. Should I still remove the silent block, I did wonder if that's what is stopping the movement I need to get the new mount in?


Paul


* 849552DA-C439-4EF8-95EA-3473A2E6E9FA.png (756.28 KB, 1280x870 - viewed 327 times.)
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #3 on: 30 March, 2020, 04:16:24 PM »

It's sandwiched. You can take the top bracket off the gearbox. I assume you have undone the big bolt and the sub sub frame? Dont undo the centre mounting  and support the mid point of the gearbox.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
PABA
Member
*
Posts: 5



« Reply #4 on: 01 April, 2020, 09:58:59 AM »

Thanks I’ll give it a go.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.379 seconds with 21 queries.