Lancia Motor Club Forum Banner
19 May, 2021, 02:27:46 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 ... 10 11 12 13 14 [15] 16 17 18 19 20 ... 25   Go Down
  Print  
Author Topic: Y10 FIRE LX  (Read 27911 times)
0 Members and 1 Guest are viewing this topic.
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #210 on: 24 September, 2020, 06:29:37 PM »

Worst bit around the vents now repaired, thankfully it hadn't spread down too far..


* IMG_20200923_160025.jpg (2921.77 KB, 4160x3120 - viewed 72 times.)
Logged
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #211 on: 24 September, 2020, 06:31:08 PM »

All welded in and smoothed out.



* IMG_20200923_170948.jpg (3572.74 KB, 4160x3120 - viewed 65 times.)
Logged
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #212 on: 24 September, 2020, 06:32:25 PM »

Corner finished off too so that's all the windscreen surround finished off.



* IMG_20200923_203756.jpg (3032.46 KB, 4160x3120 - viewed 86 times.)
Logged
tzf60
Senior Member
*****
Posts: 128



« Reply #213 on: 25 September, 2020, 01:00:32 PM »

Amazing work as ever, Kevin.
You make it look so easy....... Smiley
 
Tim
Logged

1939 Series 1 Aprilia undergoing very slow restoration.....
 
Previous Lancias: 1979 Beta Sedan 2000, 1982 Delta 1500, 1988 Delta 1.3, 1992 Dedra 1.8ie
nyssa7
Senior Member
*****
Posts: 199



WWW
« Reply #214 on: 26 September, 2020, 08:29:24 AM »

I was thinking of sneaking my car into Kevinís garage and hoping he didnít notice 😂
Logged

2000 kappa coupe 20vt
1996 kappa saloon 20vt race car
the "Yntegrale"
1999 Lotus Elise S1
2016 Mercedes CLA45 Shooting Break

Y10 Advisor
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #215 on: 26 September, 2020, 01:19:51 PM »

Cheers guys, very much appreciated  Cool

With all the stuff in the unit I probably wouldn't notice another car  Grin
Logged
fay66
Permanent resident
**
Posts: 5962



« Reply #216 on: 26 September, 2020, 10:27:17 PM »

It's not sneaking it in that's the problem, it's to get Kevin to do the work without realising it isn't one of his Grin
Brian
8227  Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
1999 Suzuki Wagon R+ GL, now my daughters
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #217 on: 26 September, 2020, 10:41:33 PM »

It's not sneaking it in that's the problem, it's to get Kevin to do the work without realising it isn't one of his Grin
Brian
8227  Cool
Yes, even I might notice that one  Grin
Logged
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #218 on: 28 September, 2020, 09:09:08 PM »

Here's an example through the next few posts of how a little "surface rust" is actually and usually the surface of a much bigger problem...
The drivers door had a scab along the bottom of the outer skin and some rust on the underside of the bottom plate..


* IMG_20200928_220730.jpg (1425.82 KB, 3332x2022 - viewed 67 times.)

* IMG_20200928_220809.jpg (2269.8 KB, 4133x2218 - viewed 69 times.)
Logged
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #219 on: 28 September, 2020, 09:12:31 PM »

The holes in the bottom plate obviously mean that needs replacing but on looking inside the door the "surface rust" was on both surfaces!  Grin
So nothing for it but to chop out the outer skin to reveal the horrors inside..


* IMG_20200925_114444.jpg (2544.64 KB, 3120x4160 - viewed 87 times.)
Logged
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #220 on: 28 September, 2020, 09:14:30 PM »

The further along I looked I couldn't see an end to the rust, nothing as bad but still rusted so couldn't be left, so nothing more to do that cut it all off..


* IMG_20200925_151637.jpg (2683.52 KB, 3120x4160 - viewed 62 times.)
Logged
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #221 on: 28 September, 2020, 09:17:22 PM »

Most of the bottom plate needed replacing apart from at both ends where strengthener plate sits, also there was rust up onto the edge up towards the door card aperture on one half so that needed replacing too.


* IMG_20200928_133850.jpg (3870.69 KB, 4160x3120 - viewed 66 times.)
Logged
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #222 on: 28 September, 2020, 09:19:59 PM »

Then finally an outer skin could be fabricated for the bottom 2" or so. Door fitted back to the car along with the wing so I could make sure it went on square and to match the new sill. Use of the clico fasteners means it will go back in the same place for welding once back off the car.


* IMG_20200928_175700.jpg (2485.58 KB, 4160x3120 - viewed 72 times.)
Logged
Kevinlincs
Permanent resident
**
Posts: 1031


« Reply #223 on: 28 September, 2020, 09:25:35 PM »

Bottom of the door skin repair panel got a folded flange as per the original skin which is bonded into place, a layer of seam sealer will tidy it up when the primer has dried.

All this effort for a bit of rust on the outside and a few holes underneath. Would have been quicker and simpler to have put some fibreglass filler in rather than spend a day and a half welding it but this way once all painted and treated it should last for years to come.


* IMG_20200928_222052.jpg (2115.91 KB, 4003x2432 - viewed 66 times.)

* IMG_20200928_222128.jpg (1886.45 KB, 3539x2281 - viewed 81 times.)
Logged
frankxhv773t
Permanent resident
**
Posts: 1983



« Reply #224 on: 29 September, 2020, 10:53:33 AM »

I presume you will reinstate the three drain holes before painting.


* IMG_20200929_114940754.jpg (3642.25 KB, 3120x4160 - viewed 67 times.)
Logged
Pages: 1 ... 10 11 12 13 14 [15] 16 17 18 19 20 ... 25   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.055 seconds with 21 queries.