Lancia Motor Club Forum Banner
28 March, 2024, 10:32:49 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: B20 s4 clutch release bearing, spacer and shim  (Read 2763 times)
0 Members and 1 Guest are viewing this topic.
impaw
Megaposter
*
Posts: 203


WWW
« on: 01 February, 2020, 06:27:25 PM »

Hello,

I am assembling the clutch on my B20.
I have gotten hold of a new release bearing and the shim and spacer, part #32 and # 42 in the enclosed diagram.
Part #32 is too big, and wont fit inside the housing.
Does anyone know the correct specifications for this part?
I would guess the outside diameter should be the same as part #42, but perhaps the inside diameter should be a little bigger?
Perhaps someone has a spare they could measure, or even better: sell?😍
All help much apreciated.

Torstein


* A874247A-5836-4854-B78B-50891848F79F.jpeg (477.66 KB, 1536x2048 - viewed 316 times.)

* 71A39A6A-22AF-4218-857C-CF637D6C68FB.jpeg (1691.52 KB, 3360x2100 - viewed 339 times.)
Logged

Torstein

1955 Aurelia B20
1966 Fulvia
1966 Fulvia rally/race car
chriswgawne
Permanent resident
**
Posts: 2038



« Reply #1 on: 02 February, 2020, 03:08:23 PM »

I am almost certain I have the parts you want on my shelves.......but I am away travelling for a couple more weeks. I will check on my return and get back to you.
Chris
Logged

Chris Gawne
Mobile: 07778 216552
impaw
Megaposter
*
Posts: 203


WWW
« Reply #2 on: 02 February, 2020, 03:45:36 PM »

Great, Thank you Chris!
Logged

Torstein

1955 Aurelia B20
1966 Fulvia
1966 Fulvia rally/race car
chriswgawne
Permanent resident
**
Posts: 2038



« Reply #3 on: 16 February, 2020, 09:17:39 AM »

Just to follow up on the recent emails I sent you Torstein.
Your TAV 27 drawing above refers to 4th series B20 ( and also I think B12) clutches.
There is an earlier version of Aurelia clutch assembly drawing TAV26 which is for B10, B21 and probably B20 3rd series and earlier where there is no component #32 or #42. The later modifications are presumably due to increased power?
Hope this helps.
Chris


* TAV26 Aurelia clutch.jpg (113.38 KB, 1024x768 - viewed 332 times.)
Logged

Chris Gawne
Mobile: 07778 216552
impaw
Megaposter
*
Posts: 203


WWW
« Reply #4 on: 16 February, 2020, 06:20:11 PM »

Thank you for the follow up .
Interesting! Yes, some sort of modification to deal with the increase of power I guess.
Logged

Torstein

1955 Aurelia B20
1966 Fulvia
1966 Fulvia rally/race car
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.069 seconds with 21 queries.