Lancia Motor Club Forum Banner
18 February, 2020, 01:34:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
Author Topic: Fulvia with a bonnet hump  (Read 177 times)
0 Members and 1 Guest are viewing this topic.
Permanent resident
Offline Offline

Posts: 3978

« on: 27 December, 2019, 05:50:15 PM »

1976 1.3.

David Laver, Lewisham.
Permanent resident
Offline Offline

Posts: 1333

« Reply #1 on: 27 December, 2019, 08:05:59 PM »

On the Fanalone Jonathan chamfered the inlet manifold to head to lower the carbs, reduced the height of the temp sender and the throttle linkage to miss the bonnet and reduced the height of the radiator by 20mm so that the rad cap cleared as well. Voila! no bonnet bulge!


Robin Lacey 3222

1932 Dilambda
1969 Fulvia S1 1.6HF Fanalone
Pages: [1]   Go Up
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines