Lancia Motor Club Forum Banner
22 November, 2019, 05:47:55 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Lancia Lubrication plate - possibly Edwardian FOC  (Read 252 times)
0 Members and 1 Guest are viewing this topic.
Mikenoangelo
Member
****
Offline Offline

Posts: 79


« on: 09 November, 2019, 09:44:15 PM »

A chum gave me this Lancia lubrication plate, in Italian, French and English.

Height 155mm x width 53mm. Made of brass with raised lettering which is only just visible due to patination. I have not attempted to clean it but have no doubt if it were cleaned the writing would be perfectly clear as can be seen from the brass rubbing kindly made by my wife, and the plate usable on the appropriate car.

If anyone recognises it I'd like to know which Lancia model it comes from, and if anyone has a use for it please let me know and you may have it FOC, rather than it lying forlorn in some drawer as it has done for many years. I wonder if it is from one of the Edwardian models?

Mike

Logged
Dikappa
Megaposter
*
Offline Offline

Posts: 259


« Reply #1 on: 10 November, 2019, 04:45:57 PM »

I'm not 100% sure but think it's a Lambda plate, which is still missing on my project.  So I would love to give it some use!
Logged
Mikenoangelo
Member
****
Offline Offline

Posts: 79


« Reply #2 on: 10 November, 2019, 10:21:44 PM »

If it is Lambda you are welcome to it but looking at the attached picture from an earlier post on the forum the Lambda plate does not look the same - although they may have changed from year to year. Can a Lambda owner have a look please?

Mike
Logged
frankxhv773t
Permanent resident
**
Offline Offline

Posts: 1526



« Reply #3 on: 11 November, 2019, 06:36:16 PM »

Here is a picture of a 1926 6th series which has plates similar to the one on offer here.
Logged
Dikappa
Megaposter
*
Offline Offline

Posts: 259


« Reply #4 on: 11 November, 2019, 07:13:51 PM »

I asked a friend with also an 8th series and he will check...there seem to be two plates normally, the longisch one as in this topic and a bigger one.
Logged
Mikenoangelo
Member
****
Offline Offline

Posts: 79


« Reply #5 on: 14 November, 2019, 11:10:24 AM »

Koen - seems like you win the raffle!!
If you send me a PM with your address etc I will post it to you. Glad it is to find a good home.

Mike
Logged
simonandjuliet
Permanent resident
**
Online Online

Posts: 2008



« Reply #6 on: 14 November, 2019, 04:07:50 PM »

Well done Koen (and Mike for your generosity !)

However, if anyone has a set of the Aprilia info plates in good condition, as per above, I would be interested - my Cabrio plates are OK but could be better

I only need the 2 large ones, Thanks
Logged

S1 Aprilia Cabrio, S2 Aprilia, S1 Promiscuo,S2 camioncino, S2 furgoncino, S3 Appia, R4 Sinpar, R4 Rodeo, R60 Tractor, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino 73,Fulvia Berlina GT, Fulvia Rallye S, Fulvia 1600 HF,
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines