Lancia Motor Club Forum Banner
28 March, 2024, 05:23:53 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Valve Clearence on the 814.00 engine.  (Read 3473 times)
0 Members and 1 Guest are viewing this topic.
Cassino
Member
****
Posts: 69


« on: 02 March, 2019, 01:20:27 PM »

I have an 814.00 head on my Appia S2 Berlina engine.
Looking at the new APPIA book from Wim......under the chapter:Keep the Appia Fit. the valve clearance and camshaft settings.It says:

For Coupe,convertable/GTE and Sport from engine number 3701 (my engine is 4617)
For these engines with 8 port cylinder head, the procedure is the same as above except that the valve clearance must be set to 1.40mm, The inlet valve just opens at TDC and the exhaust valve 3o before TDC.

Is there anyway I can confirm that what is stamped on the block ,is exactly what it says?
Are there any other "give aways".....to indicate the 814.00 spec. is what I have?

Ian


* empress 406.jpg (4034.9 KB, 3648x2736 - viewed 449 times.)
Logged

Delta Series 3. Appia Berlina Series 2.
Moto BM Zebretta. Moto Guzzi Leggera 65

Previous Lancias.
 Beta Berlina 1400,Delta 1300, Delta GT,Prisma 1500,Prisma 1600 IE, Dedra 1800, Dedra 2000.IESE.
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #1 on: 02 March, 2019, 02:36:20 PM »

I am not an Appia expert, but this refers to timing the engine rather than valve clearance?
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Brian Long
Senior Member
*****
Posts: 111

Aurelia B12, Flavia 2000 Coupe


« Reply #2 on: 03 March, 2019, 09:59:25 AM »

I agree. That figure is for setting the timing, not the clearance for operating purposes.
Lancia uses this engone timing method for most of its motors. I followed this procedure on my B12 and it is 'spot-on'
Logged
lancianut666
Permanent resident
**
Posts: 1651


Slow but rough


« Reply #3 on: 03 March, 2019, 03:51:30 PM »

Hi
Those figures are for the timing set up see attached PDF taken from the workshop manual there is a difference for this engine for the valve timing
Clarkey

* setting the timing.pdf (793.68 KB - downloaded 258 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Cassino
Member
****
Posts: 69


« Reply #4 on: 14 March, 2019, 01:37:33 PM »

Thanks Clarkey.......printed.


Ian
Logged

Delta Series 3. Appia Berlina Series 2.
Moto BM Zebretta. Moto Guzzi Leggera 65

Previous Lancias.
 Beta Berlina 1400,Delta 1300, Delta GT,Prisma 1500,Prisma 1600 IE, Dedra 1800, Dedra 2000.IESE.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.073 seconds with 20 queries.