Lancia Motor Club Forum Banner
19 August, 2022, 04:10:25 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail, for Database Administrator e-mail      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail      -      To Join the club go to
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
Author Topic: fulvia 1600 hf  (Read 1208 times)
0 Members and 1 Guest are viewing this topic.
Roy Bod Bolderson
Posts: 28

« on: 28 February, 2019, 08:26:36 AM »

Hi just wondered if any one has a picture of were the oil temp sender goes on the engine also if any one has one for sale or were i can get one please .Also cylinder head touque settings for 1600 hf manual says 3.2kgm for standard bolts and 2.3 kgm for fiat bolts how can i tell the differance ? cheers Bod
Press Officer
Permanent resident
Posts: 4536

« Reply #1 on: 28 February, 2019, 08:35:42 AM »

If bolts have FIAT on them (most likely) it is the lower figure. Best to replace anyway with 110mm long 12.9 M8 Cap bolts ant reuse the thick washers and use the higher figure.

The temp sender position depends on what oil filter mounting you have as slightly different if you have the standard one to the one the couples an oil radiator. Anyway it si on the oil filter mounting at the back.

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.087 seconds with 20 queries.