Lancia Motor Club Forum Banner
28 March, 2024, 03:48:11 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 [2] 3 4 5 6 7 ... 17   Go Down
  Print  
Author Topic: E55 LBR the parallel project  (Read 79584 times)
0 Members and 1 Guest are viewing this topic.
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #15 on: 27 June, 2018, 06:28:42 PM »

A gallon of petrol, a quick charge up of the battery, connect the choke cable, clean out the filter and bodge the air filter clip...started first go. I knew it ran but after 10 laps of the unit taken carefully as the brake pedal has no travel and only a slight bit of retardation?? master cylinder?? the little beast was ticking over nicely. The electric fan was cutting in but the gauge stayed in the middle and we had no boiling over...
First impressions...it is nice to have a Lancia that starts and runs...bumpy a bit noisy but great fun..I had forgotten how tiny these cars are. However good things must come to an end..at the Clarkey Chicane I missed getting into 3rd from 2nd and being in neutral and going a bit fast jabbed the brakes so of course the dodgy caliper I loosened off last week developed a grip of death on the disc and the fun was over for now.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
DavidLaver
Permanent resident
**
Posts: 4365



« Reply #16 on: 27 June, 2018, 08:17:54 PM »

Great news!!!
Logged

David Laver, Lewisham.
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #17 on: 23 July, 2018, 08:24:59 AM »

some pics of the 10 laps day... the car is running in the last picture honest...
Clarkey


* DSC00806.JPG (161.61 KB, 640x480 - viewed 812 times.)

* DSC00807.JPG (162.27 KB, 640x480 - viewed 775 times.)

* DSC00808.JPG (160.61 KB, 640x480 - viewed 738 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #18 on: 10 September, 2018, 06:52:42 PM »

might go up on Thursday for a play if it stays dry as big brother needs to come out and get put on a recovery wagon for a trip to Scarborough
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #19 on: 20 September, 2018, 06:51:10 PM »

Many thanks to Frank who made the trek to the North to drop of a set of alloys and some other spares for the Y10. When we were up moving the Appia I thought I could start the Y10 and give it a few laps of the circuit round the workshops...alas all I got was a loud click so stuck the battery on charge and manhandled the little beast out into the corridor and had another go once the Appia had been set on the way to Scarborough...still just a loud click...we rocked the car in gear but still no joy so the starter motor may have to come out.
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
fay66
Permanent resident
**
Posts: 6189



« Reply #20 on: 20 September, 2018, 11:10:33 PM »

Many thanks to Frank who made the trek to the North to drop of a set of alloys and some other spares for the Y10. When we were up moving the Appia I thought I could start the Y10 and give it a few laps of the circuit round the workshops...alas all I got was a loud click so stuck the battery on charge and manhandled the little beast out into the corridor and had another go once the Appia had been set on the way to Scarborough...still just a loud click...we rocked the car in gear but still no joy so the starter motor may have to come out.
Bad earth?
Corroded Earth cable at car end, not unknown on Dedra of similar vintage.
Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #21 on: 25 October, 2018, 07:44:16 PM »

update
checked the battery and earth leads seemed fine except the battery lead connection on the starter was loose inside the solenoid casing so I extracted the motor... quite easy 3 bolts and the cables and will test it against a spare one that came with the car.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #22 on: 26 October, 2018, 12:55:30 PM »

Hi all
well the spare starter spun up quite well so a possibility...the original is a bit poorly as it draws a lot of current to pull in the solenoid and the motor spins slowly. They both have problems with the threaded studs coming out of the end of the solenoid being loose...I might have to take one apart.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #23 on: 01 November, 2018, 07:30:17 PM »

On closer inspection the original starter is in better condition so will give it a try tomorrow
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #24 on: 13 November, 2018, 08:29:13 PM »

back to square one...put the starter back in just clicking as before...
 Angry
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #25 on: 14 November, 2018, 04:17:07 PM »

Always one for a laugh when I left the Y10 to sulk on Sunday I was upset to find I was locked in at the Workshop site...rang the boys in blue and they said it did not class as an emergency and they did not keep a list of the keyholder so I should ring a locksmith...rang the site manager straight to answer phone...Hmmm sure someone will come in it was only 13.30....another hour and I was trying to think if I had left any tools in the unit as I had taken most of them to Scarborough so I could saw through the chain to get the padlock off. Matron however advised me to ring the Fire Brigade.  What a result they had me free in less than 5 minutes!
Clarkey alias The Hartlepool One


* DSC00986.JPG (161.73 KB, 640x480 - viewed 610 times.)

* DSC00987.JPG (161.29 KB, 640x480 - viewed 560 times.)

* DSC00988.JPG (162.58 KB, 640x480 - viewed 604 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
stanley sweet
Lapsed
Permanent resident
**
Posts: 1149



WWW
« Reply #26 on: 16 November, 2018, 11:49:35 AM »

A quick run up with a bit of scaffold and you'd been over in no time.
Logged

1971 Fulvia 1.3S 'Leggera'  1999 Lancia Lybra 1.9JTD LX SW
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #27 on: 24 November, 2018, 08:43:11 PM »

some good news Postman Pat has delivered a big heavy parcel...
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #28 on: 26 November, 2018, 03:07:56 PM »

Early Xmas present


* DSC01132.JPG (3060.87 KB, 2592x1944 - viewed 470 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1650


Slow but rough


« Reply #29 on: 26 November, 2018, 03:35:45 PM »

more


* DSC01134.JPG (2980.41 KB, 2592x1944 - viewed 451 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Pages: 1 [2] 3 4 5 6 7 ... 17   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.079 seconds with 21 queries.