Lancia Motor Club Forum Banner
31 October, 2024, 11:22:11 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: STEERING BOX NEEDLE BEARINGS ON A FULVIA S2  (Read 1995 times)
0 Members and 1 Guest are viewing this topic.
CHENG
Member
**
Posts: 17


« on: 08 December, 2021, 10:26:47 PM »

Would anybody have the details ( makers name and number )of the 3 needle bearings that are fitted to the vertical shaft in the steering box. There are 2 fitted on the lower end and 1 on the upper.
In the parts book they are different part numbers, top bearing p/n is 2214359 and the lower two are p/n 2214358.

many thanks.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5029



« Reply #1 on: 09 December, 2021, 04:57:47 AM »

Nadella DL3020 for the needle bearing at the top of the roller shaft. It is located in the cover of the steering box. Note that it MUST be a full complement bearing. Cost appr. € 6 to 7 . Same for 1C and later boxes.
 
Nadella DL16200 for the two bottom bearings of the roller shaft. Cost € 10 to 12 each. Same for 1C and later boxes. Some steering boxes have Torrington B1816 or SKF SCE1816, but generally we find the Nadella DL16200 to have less play. Note that the bearings MUST be full complement.

From viva-lancia.com website.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
CHENG
Member
**
Posts: 17


« Reply #2 on: 09 December, 2021, 08:41:59 AM »

Tim, many thanks for your reply and the information, I was wanting to get the parts before, I start to overhaul and inspect the box.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5029



« Reply #3 on: 09 December, 2021, 09:40:09 AM »

Tim, many thanks for your reply and the information, I was wanting to get the parts before, I start to overhaul and inspect the box.
its unlikely they will need replacing unless the box has run dry (which is also unlikely as they leak predominately at the input shaft half way up the box).
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
CHENG
Member
**
Posts: 17


« Reply #4 on: 09 December, 2021, 06:42:42 PM »

Tim, would fully agree with you, and it looks quite dry. However as I am building the car for historic rallying, I will check all the bits over just to be sure.
Many thanks.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.034 seconds with 21 queries.