|
Title: S1 voltage regulator Post by: Andrew1950 on 09 December, 2015, 12:19:30 PM Would anyone have a S1 original voltage regulator (3 terminals) in good working order? It sits on the upper left wing (looking at the car)
Or, know where I can find one, possible off a car that is/has been dismantled? Many thanks I found a BERU, part no GER 024 but it is smaller and the original 3 wires are too thick to fit the 3 terminals. So if possible, I'd like to get the original and simply swap it over using the same 4 securing screws. Title: Re: S1 voltage regulator Post by: lancianut666 on 15 December, 2015, 01:16:33 PM Hi
guess you are talking S1 Fulvia..The Appia consortium may have some that might fit Clarkey Title: Re: S1 voltage regulator Post by: Andrew1950 on 15 December, 2015, 03:23:01 PM Thank you for the tip!
|