|
Title: Fulvia Zagato front wings Post by: MarkY on 03 July, 2015, 10:09:28 AM Hi all,
In the process of completely rebuilding my Fulvia Zagato, I have had various panels made by an excellent artisan craftsman whom I am sure many of you are familiar with. My question relates to how to finish the inner rear corner of the front wings, see photo of current situation. Photos of existing car wings or advice would be appreciated. Thanks, Mark. Title: Re: Fulvia Zagato front wings Post by: davidwheeler on 15 July, 2015, 08:44:16 AM I am in France and don't have my Fulvia handy but from memory just continue the flange down to the bottom.
Title: Re: Fulvia Zagato front wings Post by: MarkY on 21 July, 2015, 04:11:42 PM Thanks, we will give it a try, if anyone can post a good close up pic, that would be great!
Title: Re: Fulvia Zagato front wings Post by: davidwheeler on 04 August, 2015, 08:49:58 PM Cannot get a photo as the door is in the way. There is no right angle flange, it is folded back flat against the inside of the wing so that the door can open into the gap. The line is continued down to the bottom rebate and follows exactly the line of the door.
|