|
Title: Anyone have a jack and wheel socket ratchet from a Beta Spyder/Fulvia/Flavia? Post by: peteracs on 27 April, 2015, 12:34:22 PM Hi All
I am looking to complete my Beta Spyder toolkit and am missing the wrench which is blue in this photo, anyone have one spare they are willing to sell at hopefully not too ambitious price! Thanks Peter Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: the.cern on 27 April, 2015, 02:24:08 PM I was given one the same, or very similar to that, which apparently came from a 1300 Delta !!!!
Andy Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: fay66 on 28 April, 2015, 01:23:43 AM Hi All Peter definitely Fulvia, unfortunately I haven't one to spare, in fact mine came from Alan Cooper about 15 years ago along with most of the other tool kit, as "Fay" didn't have any tools including the Jack, come to think of it neither did my Rallye Coupe back about 1996.I am looking to complete my Beta Spyder toolkit and am missing the wrench which is blue in this photo, anyone have one spare they are willing to sell at hopefully not too ambitious price! Thanks Peter Brian 8227 8) Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: lancialulu on 28 April, 2015, 05:49:13 AM I was given one the same, or very similar to that, which apparently came from a 1300 Delta !!!! you have one in the Flavia tool kit too Andy!!Andy Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: the.cern on 28 April, 2015, 10:08:41 PM Shush Tim, no-one knows about the Flavia ..... well they didn't until now!!!!! :D :D
Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: simonandjuliet on 29 April, 2015, 07:11:55 AM Well the cat is out now ....... new owner, new post ??
Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: the.cern on 29 April, 2015, 08:47:59 AM I have sinned again, well Mrs T thinks that I have!!!!
I simply view it as one of life's little treats. I have long wanted a Flavia Vignale and now at last I have one. I was tempted by the Hooper modified one, but, being a cynic, did not believe the line about it being easily returned to original. I have put 70 miles on the clock since I collected it a week ago and all is looking good. I have joined the Flavia Consortium in the fervent hope that I will never need to use it, only time will tell!!! Unusually for me, I have bought a car in near perfect condition and so it should not take up any of my Lancia time, again only time will tell. In the meantime I hope the weather will allow me to get extensive use of it ....! If a new post is started, 'A Flavia Story' you will know that things have not gone to plan. However, I am sure that will not happen .... Andy Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: peteracs on 22 January, 2016, 12:02:49 PM Hi All
Still not found one of these wrenches, anyone know of the whereabouts of a spare one for sale? Peter Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: Jay on 22 January, 2016, 03:04:55 PM I think I may have a couple, but in gun metal gold like the rest of your tools but without the hubcap removal up turn on the end, I always had alloys. I also got the wallet and plastic cases, and a couple of the Flat and Crosshead reversible screw drivers that are not shown on your photo. I will look at the weekend if I have time.
Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: peteracs on 22 January, 2016, 05:30:32 PM Hi Julian
Thanks, the photo is one I pulled from elsewhere, not what I have. It was to serve as an illustration of what I was after. Peter Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: fay66 on 22 January, 2016, 05:48:51 PM Peter, the wrench description threw me as it's the jack ratchet as well as used with the wheel nut socket, it's the same as on my Fulvia.
Brian 8227 8) Title: Re: Anyone have a wrench from Beta Spyder toolkit? (May be same as Fulvia etc?) Post by: frankxhv773t on 22 January, 2016, 10:13:13 PM My Prismas had one too but again without the turned up end and I seem to recall the handle being a bit shorter.
Title: Anyone have a jack and wheel socket ratchet from a Beta Spyder/Fulvia/Flavia? Post by: peteracs on 22 January, 2016, 11:02:08 PM Hi Brian
Thanks, yes was not sure what to call it.... Will try to amend the title! Peter Title: Re: Anyone have a jack and wheel socket ratchet from a Beta Spyder/Fulvia/Flavia? Post by: neil-yaj396 on 04 February, 2016, 05:00:15 PM Here you go Peter;
http://www.ebay.co.uk/itm/Lancia-fulvia-flavia-Beta-toolkit-ratchet-/252272789468?hash=item3abca147dc:g:6mcAAOSwKtlWrlms The seller is Chris Bastow who worked on YAJ for me. He lives nearby. Title: Re: Anyone have a jack and wheel socket ratchet from a Beta Spyder/Fulvia/Flavia? Post by: peteracs on 04 February, 2016, 05:08:50 PM Hi Neil
Ah, I did wonder who that seller was as he has various NOS parts listed. Many thanks, hopefully not too many bidders. Peter Title: Re: Anyone have a jack and wheel socket ratchet from a Beta Spyder/Fulvia/Flavia? Post by: peteracs on 07 February, 2016, 10:36:25 PM Hi Neil
Duly purchased, many thanks for the pointer. Peter Title: Re: Anyone have a jack and wheel socket ratchet from a Beta Spyder/Fulvia/Flavia? Post by: neil-yaj396 on 08 February, 2016, 07:28:16 AM Glad to help. Funny that Chris had one. I think his parts stock is fairly run down now.
Title: Re: Anyone have a jack and wheel socket ratchet from a Beta Spyder/Fulvia/Flavia? Post by: peteracs on 08 February, 2016, 07:47:54 AM Yes, odd thing to have as NOS as well.
|