Title: Augusta headlamp innards needed Post by: JohnMillham on 26 August, 2007, 07:36:18 AM Can anyone help find me a complete and usable electrical connector which is rivetted to the inside of an Augusta headlamp? Apart from that, my car is about ready to run.
Title: Re: Augusta headlamp innards needed Post by: fay66 on 26 August, 2007, 08:02:33 AM John,
Any chance of a photo, I have a friend who has a collection of about 6-7 cars from 1898 to 1960's(No Lancia!), if I know what it looks like I could ask him for you. Brian Hilton 8227 8) Title: Re: Augusta headlamp innards needed Post by: JohnMillham on 26 August, 2007, 02:24:20 PM Thanks Brian. Inside and outside photos attached (I hope). You will see that my good one is secured by nuts and bolts rather than rivets.
Title: Re: Augusta headlamp innards needed Post by: donw on 26 August, 2007, 06:14:39 PM John
I'll have a look on Tuesday to see if I have anything. Don Title: Re: Augusta headlamp innards needed Post by: chugga boom on 28 August, 2007, 01:57:36 PM have a look on ebay, especially ebay germany there are always bosh lamps or parts of them on there, i have bought various bits of lamps and the odd complete lamp to make a good pair as my car has 2 totally different lamps on it, its surprising what turns up and the german stuff goes for alot less money than the uk prices
Title: Re: Augusta headlamp innards needed Post by: donw on 31 August, 2007, 04:26:32 PM John
I have found what you want, are you going to the Piazza if so I can bring it with me. Don Title: Re: Augusta headlamp innards needed Post by: JohnMillham on 01 September, 2007, 06:39:23 AM Great. I would prefer you to pop it in the post for me, so I can fit it this week. I'll then be ready for the MOT and can start the negotiations with Swansea about the registration number. A few bits of wiring, replacing the trim inside and a brake bleed - and the car should be ready to run. Regards, John
Title: Re: Augusta headlamp innards needed Post by: JohnMillham on 19 September, 2007, 09:36:33 AM Thanks to Nick Benwell, I now have a pair of working headlamps. It's always worth asking Nick if you need any Bosch parts - and his prices are very reasonable.
|