Lancia Motor Club

In addition to the 1300 engine (with parts) and the gearboxes, which I have listed separately, I also want to part with numerous other Fulvia spares. There are too many to list and price separately, so here is a long list. I would welcome enquiries – by email first please.

Thanks, Colin

Fulvia parts – all used except where marked NOS or just new

Fuel tank, probably S1
Aluminium bonnet Sport S1
Rear hatch with glass Sport S2, rusted out round hinge mountings
Radiator for Sport S1
Carburettors – pair of Solex 42s on a good rubber mount
Headlamp units Sport, 1 pair concave, 1pair convex. Restorable?
Rear light units (2) and covers for Sport S1
Front indicator clear glass covers for Sport S1
Side indicator amber light unit (1) for Sport
Water tap with handle – brass S1
Thermostat in its housing, not badly corroded
Brake servo S2
Brake master cylinders (2) stripped and clean – bodies OK
Brake callipers Girling S2 front and rear
Brake pads S2 Front – Bendix NOS
Speedos and other instruments S1 and S2
Oil temp gauge (1600HF) and sender
Piston rings for 1600HF Perfect Circle Boxed set (new) 82.00 + 0.60
Wheel bearing NOS SKF 102 X 38
Front grille for Sport – 2 bent broken units, repairable with skill!
Instrument dash-panel padded vinyl cover – Sport, tatty
Pedal rubbers – pair NOS
Pedal (accelerator) rubber rollers – pair NOS
Gear lever rubber gaiter
Exhaust hanger rubber (new)
Rocker cover gasket set (new)
Jack – original with ratchet handle and bag
Wheel bolts S2 – set of 16

Oil temp gauge and sender? I take it everything went?

i got all excited until i saw the date of Colin's post

Thanks for finding this list from more than four years ago. Most of the juicy items on the list have been sold, but I am slow to get round to re-advertising the remaining bits and pieces. I'll do so soon and will put up another post.

Colin

Hi Colin - are the accelerator pedal rollers and wheel bolts still available, and if so, can you give some indication of condition. Thanks, Norm