|
Title: Bearings Post by: blueboxer on 22 February, 2014, 12:07:48 PM Hi,
could someone please tell me what the application is for bearing SKF 614387? I thought they were s1 rear wheel & maybe Flavia. I've got a couple but they are much smaller than 633032A. I've never had a hub apart so please excuse my ignorance on this subject. Title: Re: Bearings Post by: Parisien on 22 February, 2014, 12:16:24 PM I have a 452 page pdf file with their bearing list on it if of any use?
P Title: Re: Bearings Post by: blueboxer on 22 February, 2014, 12:52:43 PM yes please. That would be a big help. Tried googling the reference number but only really came back with a few mentions and nothing specific.
thanks Title: Re: Bearings Post by: Parisien on 22 February, 2014, 02:15:34 PM You have quite a hefty email!
P Title: Re: Bearings Post by: Parisien on 22 February, 2014, 03:12:17 PM Or if you have any dimensions size etc....try these guys, as from the.cern/Andy
http://simplybearings.co.uk/shop/ P Title: Re: Bearings Post by: lancialulu on 23 February, 2014, 08:35:54 AM I understood all Flavia and Fulvias used the same bearing for both front and back. If it is a smaller one by how much??
Title: Re: Bearings Post by: vigzag on 23 February, 2014, 10:16:26 AM SKF 614387 is rear gearbox bearing for Fulvia and Flavia.
Title: Re: Bearings Post by: blueboxer on 23 February, 2014, 02:19:35 PM thanks for the response. I've got 2 so I'll just put them away in anticipation of the day I actually need them, if that ever comes.
Title: Re: Bearings Post by: Angle Grinder on 28 February, 2014, 12:34:29 PM I'm planning on doing a rebuild of my Flavia PF 1.8 gearbox. Would you maybe part with one of your bearings?
Assuming it is a rear gearbox bearing for the 815 variant and not the later 2000 Flavia variants? When I google the part number it indicates it as a bearing for the 819 variant. Would it be interchangeable Colin? Title: Re: Bearings Post by: rogerelias on 28 February, 2014, 08:34:49 PM If it helps, I may have a complete but stripped 1.8 box, if you want it it's yours for free, let me know and I will go to my lock up and look .
|