|
Title: Fulvia door lock inner trim plates Post by: phil-m on 27 December, 2013, 09:16:24 PM I have a pair of the stainless steel cover plates for the inside of the door on a Fulvia. They do not suit my S2 Zagato, they are more square and do not allow for such a heavily padded door card as on the Sport. Any ideas as to what they are for and is there any interest in them as I continue my clear out?
Title: Re: Fulvia door lock inner trim plates Post by: libbyvic on 11 January, 2014, 05:28:01 PM Hi Phil, are they the stainless trims that fit ontop of the inner door card? If they are, I need a set of those.
M Title: Re: Fulvia door lock inner trim plates Post by: phil-m on 11 January, 2014, 10:56:43 PM That's them. But I think they are longer as well? it is too cold to down the workshop tonight so I will have a look tomorrow and post a picture.
Title: Re: Fulvia door lock inner trim plates Post by: phil-m on 12 January, 2014, 02:46:32 PM Here you go;
If you are after the ones that go along the top of the door with the lock push button in I have them as well. Title: Re: Fulvia door lock inner trim plates Post by: libbyvic on 12 January, 2014, 05:59:45 PM Hi Phil, I have these sorry. I thought it was the ones that run along the top of the trim panels.
Cheers M Title: Re: Fulvia door lock inner trim plates Post by: phil-m on 12 January, 2014, 06:05:32 PM I have plenty of those as well ;D I have plenty the same as on my S2 car and a set which are longer and for a coupe I think. But certainly loads of Zagato ones.
|