|
Title: Fulvia respray Post by: rogerelias on 22 February, 2012, 03:43:01 PM Now for the rebuild ::)
Title: Re: Fulvia respray Post by: Nick Gramaglia on 22 February, 2012, 09:18:57 PM She is looking good, and I have got a brand new (Omicron) door mirror if you still want one.
Title: Re: Fulvia respray Post by: rogerelias on 22 February, 2012, 10:33:46 PM Thanks ,how much?
Title: Re: Fulvia respray Post by: Nick Gramaglia on 23 February, 2012, 06:24:25 PM Hi Roger Paypal is good for me, if you pm me your address I will post it early next week.
Regards Nick Title: Re: Fulvia respray Post by: rogerelias on 25 February, 2012, 06:24:04 PM Slow start commenced :)
Title: Re: Fulvia respray Post by: HF_Dave on 27 February, 2012, 08:47:07 PM https://picasaweb.google.com/103668795130984460680/20120226ModelRailScotlandPinkFloyd?authkey=Gv1sRgCOb359zhjJ6qjQE#
Here is a coupe of pictures of my Fulvia l have just started to re-assemble the trims and the window and door rubbers. Very fiddley re-fitting the door window rubber, after you screw on the stainless steel trim wou have to poke the rubber back in. what do you think of my door mirror ? I bought two at an auto jumble. By the way how do you put in the door glass, do you fit it with the aluminium rail attached ? I cant seem to be able to manouver the the rail on to the winder mechanism. Thanks. David. :) Title: Re: Fulvia respray Post by: ncundy on 27 February, 2012, 09:30:59 PM Yes, if you've got the quarter-light in you can do it by winding the carrier to it's lowest point. Fiddly and easier with the quarter-light out but that's not straight forward, it may be easier to take the rear rail out.
DON'T take the glass out of the rail, it's a sod to put back in and you can only do it off the car! |