|
Title: drive shaft grease; How much? Post by: phil-m on 17 December, 2011, 07:28:17 PM Does anyone know how much (in grammes?) grease should be used to repack the inboard & outboard driveshaft joints on a Series 2?
Title: Re: drive shaft grease; How much? Post by: zagatoboy on 18 December, 2011, 03:54:48 PM If I remember we used to get a small sachet of grease with the cv boot kit when we used to fit them? you don't fill it, make sure you have the joint nicely covered with quite a bit of excess over it and that will do, as long as it doesn't leak out again
Title: Re: drive shaft grease; How much? Post by: lancialulu on 18 December, 2011, 04:05:05 PM I always pack the joint (no rasta jokes...) then put the boot on and release any pneumatic pressure with a smal screw driver up between the shaft and the boot.....
Tim |