Title: Motronic fault codes Post by: m tulloch on 01 August, 2011, 08:27:08 AM This may be useful to anyone who has a Thema with the Motronic M1.7 system. To access the diagnostics, switch on the ignition & press the accelerator pedal to the floor 5 times quickly without starting the engine. The engine management light on the dash will flash. Codes as follows: 4-4-4-4 No error code stored 1-2-1-1 Incorrect battery voltage 1-2-1-4 Engine temperature sensor faulty 1-2-1-6 Throttle angle sensor faulty 1-2-2-1 Air flow meter faulty 1-2-2-2 Constant idle speed actuator faulty (opening winding) 1-2-2-3 Lambda probe regulation faulty 1-2-2-4 Heated lambda probe faulty 1-2-2-5 Air temperature sensor faulty 1-2-2-6 ECU faulty 1-2-3-1 Electroinjectors faulty 1-2-3-2 Ditto 1-2-3-3 Constant idle speed actuator faulty (closing winding) 1-2-3-5 A/c Input signal faulty 1-2-3-6 Heater/ventilation system (compressor control faulty) 1-2-4-3 Petrol pump relay faulty 1-2-4-4 Evaperative solenoid valve faulty 1-2-5-1 Eprom control unit faulty 1-2-5-2 Speed sensor faulty 1-2-5-4 Throttle angle sensor faulty (don't why 2 codes for this) 1-2-5-5- Cam angle sensor faulty 2-1-1-1 Knock sensor 1 faulty 2-1-1-2 Knock sensor 2 faulty 2-1-1-3 Knock regulator faulty (voltage regulator) 2-1-1-6 Ditto Treat all these codes with caution, it is possible to get codes that end up with you going on a wild goose chase but I have to say they have treated me well. Title: Re: Motronic fault codes Post by: fay66 on 01 August, 2011, 05:21:18 PM Thank you Matthew, printed a copy and it's now in my Thema Manual.
Brian 8227 8) |