Lancia Motor Club

Buy, Sell and Search => Spares required => Topic started by: bruciebonuz on 07 June, 2011, 12:35:21 PM



Title: Series 1 Fulvia Workshop Manual in English
Post by: bruciebonuz on 07 June, 2011, 12:35:21 PM
Does anyone have one for sale?  Omicron want £50 + VAT so was hoping someone might have one they no longer need.

Thanks


Title: Re: Series 1 Fulvia Workshop Manual in English
Post by: ncundy on 07 June, 2011, 01:00:36 PM
You can get it on a disc from Huib at VL but it only covers the early cars (up to about '66 IIRC). There is a seperate interim workshop manual that covers the cross-over period (S1-S2) and includes the Fanalone engine and piggyback gearbox as well as the standard S2 car, but AFAIK it is only available in Italian. I have an electronic copy if you want, but I'd have to send it on a 'stick. You will definately need it for the 'box as it is different to the 4 speed (comprehesively different - it's not just a 5th speed stuck on the back) and the final drive assembly which is different from the 4 speed. Both are different from the s2 5 speed 'box. The engine is similar to the S2 1600, the major differences being the clutch/flywheel and the con rods.

To use it you also need the Technical Data book as they go hand in hand (the workshop manual does not have many/any torque tables in, instead it refernces the tables in the TD book). The TD book is on Huibs disk.


Title: Re: Series 1 Fulvia Workshop Manual in English
Post by: Neil on 07 June, 2011, 01:16:08 PM
Huib's CD version is very handy from the VL site, but lots of pdfs to sort through, I have the s2 version and came on 2 CDs I am not sure how much is overlapped with yours Neil?


Title: Re: Series 1 Fulvia Workshop Manual in English
Post by: stuwilson128 on 07 June, 2011, 02:45:16 PM
I got my copy from Mercian Manuals a few years ago http://www.mercianmanuals.co.uk/.  I had a look and they are still advertising them, so may be worth checking out.


Title: Re: Series 1 Fulvia Workshop Manual in English
Post by: Richard Fridd on 07 June, 2011, 05:00:01 PM
hi Jonathan,you may already have one but i have a second hand LMC reprint in my jumble 25pounds inc uk p+p which seems to include s2 .best regards richard


Title: Re: Series 1 Fulvia Workshop Manual in English
Post by: bruciebonuz on 07 June, 2011, 07:14:55 PM
Thanks all for the quick replies and offers.  Hopefully sorted now between the info on the stick Neil C previously sent me and a disk Neil S has offered to send me.  The help you get on this forum is always gratefully received.