Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: ah_sprite on 25 November, 2010, 08:52:26 PM



Title: Rear seat back removal
Post by: ah_sprite on 25 November, 2010, 08:52:26 PM
Hi all
Just wondering how the rear seat back is fixed? I can see two screw fittings at the bottom of the seat back, but there's nothing visible at the top, not even when I look inside the boot. How is it fixed in place?

Many thanks
Richard


Title: Re: Rear seat back removal
Post by: HF_Dave on 25 November, 2010, 09:02:51 PM
Just remove the two screws at the bottom of the seat back and it will pull forward. Pull it forward about three inches and grab the bottom with both hands and push up, it should pop out ! there are two tabs at the top of the bulkhead that the seat locates into and baisically it just clips into them. Hope this is of help :)