Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: KiltedSkier on 06 September, 2010, 05:53:10 PM



Title: Fulvia S3 Panels - suppliers please.
Post by: KiltedSkier on 06 September, 2010, 05:53:10 PM
Hi Folks,

the Fulvia has gone into Gordon Needs classics bodyshop in Alyth to have some work done. He made a very nice job of the evoluzione and judging how busy he has been this year word is obviously spreading about his workmanship.

He has uncovered a fair few "bodges" and it needs the rear light panel, rear valance and drivers outer sill (RHD) replacing.

I have found Omicron, Radford Panel Co. and Classic Lancia Restorations (David Ashworth) as panel suppliers online - are there any other contacts or can anyone recommend any of those I have listed.

These pics are from Knockhill a few weeks ago - 25 laps with an instructor which I got as a Birthday present. Great fun and the instructor was delighted not to be in "another chavved up Corsa!"

(http://farm5.static.flickr.com/4115/4944527467_4827114737_b.jpg) (http://www.flickr.com/photos/37090591@N05/4944527467/)
KP-030810-0811 (http://www.flickr.com/photos/37090591@N05/4944527467/) by KiltedSkier (http://www.flickr.com/people/37090591@N05/), on Flickr

(http://farm5.static.flickr.com/4114/4944524671_0158bbb115_b.jpg) (http://www.flickr.com/photos/37090591@N05/4944524671/)
KP-030810-0835 (http://www.flickr.com/photos/37090591@N05/4944524671/) by KiltedSkier (http://www.flickr.com/people/37090591@N05/), on Flickr

(http://farm5.static.flickr.com/4139/4944521395_176b46b43b_b.jpg) (http://www.flickr.com/photos/37090591@N05/4944521395/)
KP-030810-0754 (http://www.flickr.com/photos/37090591@N05/4944521395/) by KiltedSkier (http://www.flickr.com/people/37090591@N05/), on Flickr

Grateful for any help,

Gus


Title: Re: Fulvia S3 Panels - suppliers please.
Post by: thecolonel on 06 September, 2010, 06:20:18 PM
There is also:

Ricambi-automobilia on ebay

http://myworld.ebay.com/ebaymotors/ricambi-automobilia/

often has new Fulvia panels etc.


Title: Re: Fulvia S3 Panels - suppliers please.
Post by: zagatoman on 06 September, 2010, 08:00:59 PM
You need to speak to Bill Lewis, he makes all the panels for David Ashworth, Omicron, and Western Lancia.

He is a magician and a very nice bloke.

I have sent you a PM with his contact details.

Paul

P.S, hes not actually a magician, just very skilled.


Title: Re: Fulvia S3 Panels - suppliers please.
Post by: KiltedSkier on 09 September, 2010, 05:47:45 PM
Thanks for your help.

Bill is now in touch with Gordon directly.

The half cage has arrived so I'll get that out to them as well.

Cheers,
Gus