Title: Fulvia Engine required Post by: stuwilson128 on 01 August, 2010, 06:48:05 PM I have had an email from somebody who has recently bought a kit car, the rear of which uses a Fulvia subframe, gearbox and engine (pictures of the car are attached). While the gearbox if ok, the engine is seized. He is looking for a running Fulvia engine, either 1.3 or 1.6. If anybody can help, please contact me and I will forward his email address.
Title: Re: Fulvia Engine required Post by: fay66 on 02 August, 2010, 02:11:32 AM Looks rather nice but unless he has very deep pockets he'd better stick to the 1.3, any idea what make it is?
Brian 8227 8) Title: Re: Fulvia Engine required Post by: stuwilson128 on 02 August, 2010, 06:03:34 AM He tells me that it currently has a 1.3 in it, along with a spare engine which is in thousands of bits! I don't know what make it is.
Title: Re: Fulvia Engine required Post by: SanRemo78 on 02 August, 2010, 09:54:32 PM He tells me that it currently has a 1.3 in it, along with a spare engine which is in thousands of bits! I don't know what make it is. 'Tis an Avante Sports - more than that I cannot tell you :) Guy http://www.google.co.uk/imgres?imgurl=http://www.pistonheads.com/clubmans/detling/19.JPG&imgrefurl=http://www.pistonheads.com/clubmans/detling/&usg=__86yv5egAYi3-IrLdLB6KJHVia84=&h=563&w=750&sz=76&hl=en&start=16&tbnid=1f4gvkBPc_rH9M:&tbnh=106&tbnw=141&prev=/images%3Fq%3Davante%2Bcar%26hl%3Den%26gbv%3D2%26tbs%3Disch:1&itbs=1 Title: Re: Fulvia Engine required Post by: Richard Fridd on 03 August, 2010, 05:08:22 PM avante +2 i think-just when most people were writing off the idea of beetle based exotikits the avante cropped up.Melvyn Kay styling on a vw floor.the +2 was 8ins longer/6ins higher than the 1st model.built 1983-1986
Title: Re: Fulvia Engine required Post by: stuwilson128 on 11 August, 2010, 11:16:47 PM An engine has now been acquired.
|